belt noise

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
Adam_Ant
In Neutral
Posts: 16
Joined: Fri Aug 24, 2007 12:26 am
Location: FLorence, KY

belt noise

Post by Adam_Ant »

So im sitting at a light with my car in neutral and I start to hear a noise from the engine bay almost sounds like a belt. When I push in on the clutch the noise goes away. Any of you guys and gals have a thought as what it may be? Any help would be great. Also anywhere to host pics for the site.
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

Throwout bearing, probably.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
Adam_Ant
In Neutral
Posts: 16
Joined: Fri Aug 24, 2007 12:26 am
Location: FLorence, KY

Post by Adam_Ant »

Thats not a bad idea hadnt thought of that. As far as I know its the original clutch so thats a really good idea.
IronMonkeyL255
Fourth Gear
Posts: 1902
Joined: Sat Aug 09, 2003 5:02 pm
Location: Woodruff, SC

Post by IronMonkeyL255 »

9 times out of 10, that's what it is when you have a noise only when the car is in neutral with the clutch engaged.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.

That being said, everything I post is accurate to the best of my knowledge.

Rio Red '91 Legacy SS
Dynamic Entry
Third Gear
Posts: 908
Joined: Wed Dec 06, 2006 11:24 am
Location: Calgary, AB

Re: belt noise

Post by Dynamic Entry »

Adam_Ant wrote: anywhere to host pics for the site.
Photobucket
Webshots
Facebook
Andrew

16 Outback - wife's daily
95 Gravel Express - Sold
92 Green SVX - RIP
02 WRB WRX - Sold
93 White SS "Angel": 4EAT to 5MT 550 Robtune !SOLD!
̶9̶2̶ ̶W̶i̶n̶e̶s̶t̶o̶n̶e̶ ̶S̶S̶ ̶5̶M̶T̶ R.I.P.
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

tinypic.com is also really nice. you don't need an account.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
91riored
In Neutral
Posts: 43
Joined: Wed Oct 03, 2007 5:26 pm
Location: Northwest Connecticut

Post by 91riored »

do the output shaft on ss warp and pit like on the 2.5 legacys? I had to have my buddy get a sleeve for my old wagon the throw out would et hung up sometimes and squeel.. the fork also spiderd at the pivit point not pretty
i guess i'm the forum a-hole now
Post Reply