Need Part #'s! Jamal!! haha help!
Moderators: Helpinators, Moderators
-
- Fourth Gear
- Posts: 1517
- Joined: Mon Oct 10, 2005 8:25 pm
- Location: Portland, Oregon/ Boise, Idaho
- Contact:
Need Part #'s! Jamal!! haha help!
First off all of these parts are to be spec'd for a 91' SS. I am looking for parts that directly bolt in, no modification required. I have 92+ tophats ready to go. I need the suggested brand, and part #'s for each of the following products:
1. Whiteline Anti Lift Kit
2. Whiteline Steering Rack Bushings
3. Ground Control Coilover Sleeves
4. Prothane bushing kit
5. Whiteline Rear diff bushings
6. Whiteline RCA adjusters
7. Subframe lock bolts
8. Camber Plates
Thanks guys!
1. Whiteline Anti Lift Kit
2. Whiteline Steering Rack Bushings
3. Ground Control Coilover Sleeves
4. Prothane bushing kit
5. Whiteline Rear diff bushings
6. Whiteline RCA adjusters
7. Subframe lock bolts
8. Camber Plates
Thanks guys!
91 SS -Carbon Bronze Pearl
EJ257/EJ205 Hybrid
Built by NWSS www.simplysubie.com
93 Ford Ranger-DD
91 Rio Red SS- RallyX Project
93 AWD Sedan- FOR SALE!
Sponsors: NWSS, Forced Performance, Surgeline, RalliTEK
EJ257/EJ205 Hybrid
Built by NWSS www.simplysubie.com
93 Ford Ranger-DD
91 Rio Red SS- RallyX Project
93 AWD Sedan- FOR SALE!
Sponsors: NWSS, Forced Performance, Surgeline, RalliTEK
-
- quasi-mod-o
- Posts: 6000
- Joined: Thu Dec 05, 2002 7:06 pm
- Location: Tampa, FL
IIRC, the Whiteline steering rack bushings are KSR202. I believe you can get them from www.allsubaru.com
-
- Fourth Gear
- Posts: 1517
- Joined: Mon Oct 10, 2005 8:25 pm
- Location: Portland, Oregon/ Boise, Idaho
- Contact:
-
- quasi-mod-o
- Posts: 6000
- Joined: Thu Dec 05, 2002 7:06 pm
- Location: Tampa, FL
Re: Need Part #'s! Jamal!! haha help!
1. KCA319 (KCA359 also works)livestrong14 wrote:F
1. Whiteline Anti Lift Kit
2. Whiteline Steering Rack Bushings
3. Ground Control Coilover Sleeves
4. Prothane bushing kit
5. Whiteline Rear diff bushings
6. Whiteline RCA adjusters
7. Subframe lock bolts
8. Camber Plates
Thanks guys!
2. KSR202
3. depends on application... call them directly.
4. not worth getting- some stuff doesn't fit or will be duplicate
5. KSB751
6. KCA313
7. KSB750
8. Get the 02+ RCE plates, and confirm with them they'll work with your struts
Group N rear lateral link bushings would also be a good idea.
globalperformanceparts.com has the catalog on their website (but prices are too high)
-
- Fourth Gear
- Posts: 1517
- Joined: Mon Oct 10, 2005 8:25 pm
- Location: Portland, Oregon/ Boise, Idaho
- Contact:
Thanks Jamal, I can get the stuff global performance stocks for cheaper from RalliTEK. I really appreciate the help man!
91 SS -Carbon Bronze Pearl
EJ257/EJ205 Hybrid
Built by NWSS www.simplysubie.com
93 Ford Ranger-DD
91 Rio Red SS- RallyX Project
93 AWD Sedan- FOR SALE!
Sponsors: NWSS, Forced Performance, Surgeline, RalliTEK
EJ257/EJ205 Hybrid
Built by NWSS www.simplysubie.com
93 Ford Ranger-DD
91 Rio Red SS- RallyX Project
93 AWD Sedan- FOR SALE!
Sponsors: NWSS, Forced Performance, Surgeline, RalliTEK
-
- Fourth Gear
- Posts: 1517
- Joined: Mon Oct 10, 2005 8:25 pm
- Location: Portland, Oregon/ Boise, Idaho
- Contact:
yes it does. They make my favorite camber plates. The Whiteline Max-C stuff is neat but they throw the toe WAY off when you slide them in. The nice part about the RCE plates is that you gain positive caster and negative camber. The Whitelines lose caster to add camber and vice-versa.
Although, since you're going with ground control sleeves, ask them about their plates. I've heard they're great but haven't seen them. Plus I'm sure they cost less than $400.
Although, since you're going with ground control sleeves, ask them about their plates. I've heard they're great but haven't seen them. Plus I'm sure they cost less than $400.
-
- First Gear
- Posts: 205
- Joined: Sat Oct 06, 2007 8:20 pm
- Location: Fort Collins, CO
are those the steering rack bushings that 94 turbo legacys have?
oh, do you know which whiteline rear spring i will need? either 70368 or 70369 (i'm guessing one is for the sedan, one is for the wagon)
thanks in advance
-Ted
oh, do you know which whiteline rear spring i will need? either 70368 or 70369 (i'm guessing one is for the sedan, one is for the wagon)
thanks in advance
-Ted
1994 maroon Subaru Legacy SS sedan
1990 white Toyota Celica Alltrac - well modded :D
Bring the track to you
http://www.youtube.com/watch?v=mXfUbFR-x7g
1990 white Toyota Celica Alltrac - well modded :D
Bring the track to you
http://www.youtube.com/watch?v=mXfUbFR-x7g
-
- In Neutral
- Posts: 37
- Joined: Wed Jul 11, 2007 8:00 pm
- Location: Plymouth, MN
Yes, Ted. The '202s are the steering rack bushings for our cars. I put mine in last week. HUGE difference on 13 year-old bushings.denver_whitest185 wrote:are those the steering rack bushings that 94 turbo legacys have?
oh, do you know which whiteline rear spring i will need? either 70368 or 70369 (i'm guessing one is for the sedan, one is for the wagon)
thanks in advance
-Ted
According to the catalog the 70368s are specifically for the Sedan. I'm guessing that means the 70369s are for the wagon. However it looks like those numbers are only for the rear. The fronts (only one number for those) are numbered 70198.
[url=http://bbs.legacycentral.org/viewtopic.php?t=35873]1994 Maroon Legacy SS with lots of mods[/url]
2000 BMW M5 with brake ducts and nice brakes
2002 Audi A6 with nice brakes
2000 BMW M5 with brake ducts and nice brakes
2002 Audi A6 with nice brakes
-
- First Gear
- Posts: 205
- Joined: Sat Oct 06, 2007 8:20 pm
- Location: Fort Collins, CO
thanks Greg. i think im going to get those steering bushings soon, when i free up a few bucks. i bought too much stuff this week (boost gauge, holder, underbrace, endlinks, and some other non-car stuff), so i need to back off for a bit.
1994 maroon Subaru Legacy SS sedan
1990 white Toyota Celica Alltrac - well modded :D
Bring the track to you
http://www.youtube.com/watch?v=mXfUbFR-x7g
1990 white Toyota Celica Alltrac - well modded :D
Bring the track to you
http://www.youtube.com/watch?v=mXfUbFR-x7g