I broke the nipple off of mine to! My fix was to get a brass fitting, I
believe it had a pipe thread or maybe just machine thread with a hose barb
on the other side. I just reamed out the hole in the tank to accept the
fitting, put a dab of Permatex on the threads and screwed it into place,
almost two years ago now. I also bought a new replacement tank "just in
case" and probably will install it at the same time as the intercooler.
PeteH
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
coolant tank..........
Moderators: Helpinators, Moderators
-
Dave C
coolant tank..........
In trying to fit the blasted intercooler last night, i finally
snapped the top two fittings from mine.
Thankfully i had a JC aluminum tank (20 miles away, at home). It fit
right in, has probably 2x the capacity, and looks pretty cool.
One thing i did notice is that the plastic in the hose coming from
the turbo was falling to bits as i tried to pick it from the inside
of the hose. Nasty.
--- In BC-BFLegacyWorks@y..., "PJHARJ" <pjharj@s...> wrote:
> I broke the nipple off of mine to! My fix was to get a brass
fitting, I
> believe it had a pipe thread or maybe just machine thread with a
hose barb
> on the other side. I just reamed out the hole in the tank to
accept the
> fitting, put a dab of Permatex on the threads and screwed it into
place,
> almost two years ago now. I also bought a new replacement
tank "just in
> case" and probably will install it at the same time as the
intercooler.
>
> PeteH
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
snapped the top two fittings from mine.
Thankfully i had a JC aluminum tank (20 miles away, at home). It fit
right in, has probably 2x the capacity, and looks pretty cool.
One thing i did notice is that the plastic in the hose coming from
the turbo was falling to bits as i tried to pick it from the inside
of the hose. Nasty.
--- In BC-BFLegacyWorks@y..., "PJHARJ" <pjharj@s...> wrote:
> I broke the nipple off of mine to! My fix was to get a brass
fitting, I
> believe it had a pipe thread or maybe just machine thread with a
hose barb
> on the other side. I just reamed out the hole in the tank to
accept the
> fitting, put a dab of Permatex on the threads and screwed it into
place,
> almost two years ago now. I also bought a new replacement
tank "just in
> case" and probably will install it at the same time as the
intercooler.
>
> PeteH
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
-
dfullerton
coolant tank..........
This is a comon fault that subaru felt they needed to change to ally header
tanks, i have an impreza one now not hard to fit .
----- Original Message -----
From: "Dave C" <legacycentral@yahoo.com>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Friday, July 20, 2001 2:40 PM
Subject: [BC-BFLegacyWorks] Re:coolant tank..........
> In trying to fit the blasted intercooler last night, i finally
> snapped the top two fittings from mine.
>
> Thankfully i had a JC aluminum tank (20 miles away, at home). It fit
> right in, has probably 2x the capacity, and looks pretty cool.
>
> One thing i did notice is that the plastic in the hose coming from
> the turbo was falling to bits as i tried to pick it from the inside
> of the hose. Nasty.
>
> --- In BC-BFLegacyWorks@y..., "PJHARJ" <pjharj@s...> wrote:
> > I broke the nipple off of mine to! My fix was to get a brass
> fitting, I
> > believe it had a pipe thread or maybe just machine thread with a
> hose barb
> > on the other side. I just reamed out the hole in the tank to
> accept the
> > fitting, put a dab of Permatex on the threads and screwed it into
> place,
> > almost two years ago now. I also bought a new replacement
> tank "just in
> > case" and probably will install it at the same time as the
> intercooler.
> >
> > PeteH
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
tanks, i have an impreza one now not hard to fit .
----- Original Message -----
From: "Dave C" <legacycentral@yahoo.com>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Friday, July 20, 2001 2:40 PM
Subject: [BC-BFLegacyWorks] Re:coolant tank..........
> In trying to fit the blasted intercooler last night, i finally
> snapped the top two fittings from mine.
>
> Thankfully i had a JC aluminum tank (20 miles away, at home). It fit
> right in, has probably 2x the capacity, and looks pretty cool.
>
> One thing i did notice is that the plastic in the hose coming from
> the turbo was falling to bits as i tried to pick it from the inside
> of the hose. Nasty.
>
> --- In BC-BFLegacyWorks@y..., "PJHARJ" <pjharj@s...> wrote:
> > I broke the nipple off of mine to! My fix was to get a brass
> fitting, I
> > believe it had a pipe thread or maybe just machine thread with a
> hose barb
> > on the other side. I just reamed out the hole in the tank to
> accept the
> > fitting, put a dab of Permatex on the threads and screwed it into
> place,
> > almost two years ago now. I also bought a new replacement
> tank "just in
> > case" and probably will install it at the same time as the
> intercooler.
> >
> > PeteH
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com