justy 5 spd
Moderators: Helpinators, Moderators
-
- First Gear
- Posts: 58
- Joined: Fri Feb 08, 2008 6:58 am
justy 5 spd
will a justy 5spd trannie work in a 1991 LEGACY TURBO??
The Justy was made, for Subaru, by Suzuki.
Will not work.
Will not work.
Legacy Central
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
But you could use a legacy 5mt in a Justy!
by EJ swapping it...
by EJ swapping it...

~Spencer
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
Eventually, after you made an engine cradle and bashed the firewall in for the bell housing, etc...
Legacy Central
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
**DROOL**smh0101 wrote:Can you imagine an ej257 swaped justy
Holy Crap!
That would be insane!!!!!
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
...and a mess. A stripped GC would be much stiffer and much, much easier to do.
Legacy Central
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
Someone actually swapped a 02ish WRX drivtrain into a Justy.
It was AWD & ran low to mid 12's on the stock WRX motor.
Search for WRX swapped Justy or something like that to find the web-page. The page has alot of pics & info on the swap.
I was actually thinking of making a RWD, EJ powered, back halfed (rear 1/2 of the car tube framed) Justy as it is basically the same as the KP61 Starlets 5-6 of my friends run now.
It was AWD & ran low to mid 12's on the stock WRX motor.
Search for WRX swapped Justy or something like that to find the web-page. The page has alot of pics & info on the swap.
I was actually thinking of making a RWD, EJ powered, back halfed (rear 1/2 of the car tube framed) Justy as it is basically the same as the KP61 Starlets 5-6 of my friends run now.
94 Legacy SS
96 Impreza OBS
99 Impreza OBS-T
04 Sienna XLE Limited AWD
96 Impreza OBS
99 Impreza OBS-T
04 Sienna XLE Limited AWD
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
Blasphamy!!!!! I'd never tinker with an authentic 360 (our local dealership has one from the first production runs).
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
- Knowledgeable
- Posts: 3335
- Joined: Wed Feb 16, 2005 9:40 pm
- Location: Oregon
He is a crazy Puerto Rican that had a KP61 Starlet with a Starion engine swap (in the mid '90s) who's boost control was leaving the wastegate disconnected....
I hope he leaves the thing alone, but he is too much of a speed freak to do that so I can see him putting a bike motor in.
360s have a rear mounted 360cc 2cyl engine (?-hp), so putting a bike motor in should easily triple HP (600cc sport bikes make 100WHP these days).
?- Rear diff, but I got the impression he wanted to mod a rear from a quad as this would get him chain drive & is about the right track width.
I never knew KP61s were popular rally cars until I got a rally vid from Europe & saw KP after KP running.
Again I hope he just leaves the thing alone as it is supposed to be pretty clean.
I hope he leaves the thing alone, but he is too much of a speed freak to do that so I can see him putting a bike motor in.
360s have a rear mounted 360cc 2cyl engine (?-hp), so putting a bike motor in should easily triple HP (600cc sport bikes make 100WHP these days).
?- Rear diff, but I got the impression he wanted to mod a rear from a quad as this would get him chain drive & is about the right track width.
I never knew KP61s were popular rally cars until I got a rally vid from Europe & saw KP after KP running.
Again I hope he just leaves the thing alone as it is supposed to be pretty clean.
94 Legacy SS
96 Impreza OBS
99 Impreza OBS-T
04 Sienna XLE Limited AWD
96 Impreza OBS
99 Impreza OBS-T
04 Sienna XLE Limited AWD