I was going to do a seperate stock engine for my legacy, but schools pricey and I'm just rebuilding my original. So now I wont need to double up on my rebuilding parts/stuff...
Legacy Parts:
-----------USED, but excellent shape:
One Black Top fuel injector left... Rebuilt and cleaned by Witchhunter Performance... Have flow chart... $20 + $8 shipping
Two Pink Top fuel injectors left... Rebuild and cleaned by Witchhunter Performance... Have flow charts... $40 + $8 shipping
Left, Rear *Drivers-side* Spindle, cleaned, checked and repainted... $30 + $10 shipping
Stock EJ22T Engine Mounts... $40 + $15 shipping
EJ22T/EJ22 passenger side, rear timing cover *10 + $5 shipping
EJ22T Hydraulic Clutch Master Cylinder *25 + $10 shipping
==========================================
Has 160k miles, but in good shape
==========================================
Stock Turbo Manual Trans Mount $10 + $10 shipping
Stock EJ22T rotors, $40 + 20 shipping
Stock EJ22T water pump *core or install seals*$20 + $10 shipping
Stock EJ22T oil pump *core or install seals*$30 + $10 shipping
Stock linkage (I'd throw in a bushing set, but not all rusted or broken) *free + $15 shipping
==========================================
WRX Parts:
13,000 mile, used 2003 WRX spring set $35 + $25 shipping
(Top Mount) Intercooler from same WRX, Fins are beautiful. $70 + $15 shipping.
============================================
Stock EJ22T Crankshaft... *SOLD 03-10-08*
Balanced set of EJ22T rods *SOLD 03-10-08*
Stock EJ22T headgasket pair... *SOLD 03-10-08*
Stock EJ22T Pistons *SOLD 02-23-08*
Man Trans Front Axles *SOLD 02-24-08*
Gatorback timing belt... *SOLD 02-24-08*
Toga brand Bearings... *SOLD 03-03-08*
============================================
-
FS WRX & EJ22T parts, priced to sell... Added New Stuff
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
FS WRX & EJ22T parts, priced to sell... Added New Stuff
Last edited by Legacy Rally Guy on Fri Mar 14, 2008 3:50 pm, edited 12 times in total.
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
I've got a pretty good bead on the shipping prices, but if you've got a better idea of a price *reasonable ofcourse*, let me know what you'd like to pay.
Oh and the other type of timing belt is a "Proline" brand. I've looked at all three I have *including the one I'm installing(all are different brands)* and there isn't a difference in anything but the printed name on belt and belt price...
Oh and the other type of timing belt is a "Proline" brand. I've looked at all three I have *including the one I'm installing(all are different brands)* and there isn't a difference in anything but the printed name on belt and belt price...
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
-
dropdfocus
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
If the pistons are still available, I'll take 'em! PM me your info to pay for them... 
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
dropdfocus
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
-
dropdfocus
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
-
dropdfocus
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
except I gotta break a little bad news to What Huh.. I cannot find the rear axle shaft for the life of me.. hmm. I think a buddy may have recycled it... I was able to find the front two, no prob, but the rear has gone missing..dropdfocus wrote:Sweet, you're getting just about everything sold!
I'll send him back the money for that one. Sorry What Huh.....What Huh:
Your front axles and timing belt will ship monday though.. I'll talk to a few people about getting the rear axle... Gotta keep an eye out for those things, they're getting pretty rare.
Dropdfocus:
Your Pistons will ship monday, luckily they didn't get recycled!
-Ken
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
k no prob i was just going to get it rebuilt anyways there is a subaru dealer about ten min from my house
1998 Legacy GT-T ... sold
2000 Legacy GT Wagon 5-speed ... heck yeah
1994 Legacy SS ABM Wagon ... project http://bbs.legacycentral.org/viewtopic.php?t=35107&start=0
Help http://bbs.legacycentral.org/viewtopic.php?t=35210
2000 Legacy GT Wagon 5-speed ... heck yeah
1994 Legacy SS ABM Wagon ... project http://bbs.legacycentral.org/viewtopic.php?t=35107&start=0
Help http://bbs.legacycentral.org/viewtopic.php?t=35210
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Just sent your refund for the rear axle.what huh wrote:k no prob i was just going to get it rebuilt anyways there is a subaru dealer about ten min from my house
-Ken
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
dropdfocus
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
I listed the bearing set on ebay with no reserve...
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 43544&rd=1
Have fun...
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 43544&rd=1
Have fun...
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Shipped out the parts so far, I'll supply the tracking numbers here in a bit.
It'll take a day before they update the current status of em though, the packages arrived at the ups drop off just after the UPS truck took off and since this is a one horse town, the ONE post office that was open, is closed almost all day, since the delivery person IS the only employee there.. haha....
will pm with tracking numbers..
thanks guys
It'll take a day before they update the current status of em though, the packages arrived at the ups drop off just after the UPS truck took off and since this is a one horse town, the ONE post office that was open, is closed almost all day, since the delivery person IS the only employee there.. haha....
will pm with tracking numbers..
thanks guys
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
Boostedballs
- First Gear
- Posts: 204
- Joined: Mon Apr 25, 2005 12:38 am
I'm interested in the "13,000 mile, used 2003 WRX spring set $35 + $25 shipping "
will this do anything for the ride height / handling of my 91 SS? thanks!
will this do anything for the ride height / handling of my 91 SS? thanks!
Air-to-Water Intercooler, VF-39, 550 injectors, AEM FIC, stainless race header, 3" stainless exhaust, 75hp Nitrous, 150psi H2O injection, intake mods, stock: long block, 4EAT, ecm.
-
dropdfocus
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
Likely lift the rear 1/2", but it will increase handling a bit better than you stock springs did.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
Legacy Rally Guy
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
I've no clue ^^ I was going to put them in, but It's been so long since I've driven the car, I wanted to get to know it with good struts, before I make a decision on sway bars/springs.. so yeah, they're still up for grabs.. ^^Boostedballs wrote:I'm interested in the "13,000 mile, used 2003 WRX spring set $35 + $25 shipping "
will this do anything for the ride height / handling of my 91 SS? thanks!
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)