Last chance Parting out '91 Legacy Turbo SS

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Last chance Parting out '91 Legacy Turbo SS

Post by Gristle »

I have to get this lump off my trailer so I can use the trailer again! I'll be taking the hulk to the scrapyard next week, so if anyone needs bits let me know now!

What's gone already:
Rear diff
Engine, harness, ecu
Hood, front bumper, LF fender and LF door
Wheels
Crossmember
Front corner lights


Still have:
Auto trans TCU $35
Radiator with dual fans $80
Brakes, all $150
Power sunroof
RF fender, Rio Red $40
LR door, complete $65
Front grill with emblem $25
Trunk with spoiler $75
Steering rack $50
Stock struts/springs $25 each
Rear axles, each $50
Front axle $60
Dash, complete w/instuments, radio, etc. $80
Rear taillight assemblies $30 each
Front headlights $30 each
Front turn signals (in lower bumper) $20 each
Entire dash - grey color
Windshield washer bottle $15
Radiator overflow tank $15
Misc junk still attached to car...

All plus shipping/freight!
dave@davesport.com
425-888-4444
Last edited by Gristle on Fri Mar 07, 2008 8:36 pm, edited 6 times in total.
Top
boro
Second Gear
Posts: 280
Joined: Thu Jun 15, 2006 3:36 am
Location: St.Louis, MO
Contact:
Contact boro

Post by boro »

does the rack have inner tie rods that are in good condition?
91 SS Pearl White
>Apexi Power Intake, HKS 3" Downpipe, Saab TMIC, Blitz SS bpv, STi Shifter and Bushing, WRX Suspention and Clutch, Whiteline RCA Kit, Whiteline Steering Rack Bushings (sport), Ghetto HoodScoop
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

boro wrote:does the rack have inner tie rods that are in good condition?
They seem to be in good contition - there was no slop in the steering wheel. If there's something else you want to to check let me know.
Top
jefferson
Third Gear
Posts: 768
Joined: Sat Dec 16, 2006 4:41 am
Location: Parkville, Mo.

Post by jefferson »

Are those fog lights the factory units that replace the turns under the bumper?

Jeff
91 Black SS 5spd. Edm lights, wrx gauges in dash, 45 degree airbox, cryoed drilled and slotted brakes. Invidia divorced downpipe with custom stainless exhaust. To be installed, aluminum a-arms, manual belts, awic.
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

jefferson wrote:Are those fog lights the factory units that replace the turns under the bumper?

Jeff
They do mount in the bumper, but maybe I'm wrong and they aren't fogs? I know the front corner lights had turn signals in them, so figured the ones (clearish) in the bumper were fogs.
Top
jefferson
Third Gear
Posts: 768
Joined: Sat Dec 16, 2006 4:41 am
Location: Parkville, Mo.

Post by jefferson »

On the 91 the corners were just marker lights and the turns were under the bumper. If you got the factory fogs then there was some work to put the turns in the corners. Do you have a fog light switch on the dash?

If they are truly the factory fogs I will take them along with the switch.

Let me know.

Jeff
91 Black SS 5spd. Edm lights, wrx gauges in dash, 45 degree airbox, cryoed drilled and slotted brakes. Invidia divorced downpipe with custom stainless exhaust. To be installed, aluminum a-arms, manual belts, awic.
Top
boro
Second Gear
Posts: 280
Joined: Thu Jun 15, 2006 3:36 am
Location: St.Louis, MO
Contact:
Contact boro

Post by boro »

Gristle wrote:
boro wrote:does the rack have inner tie rods that are in good condition?
They seem to be in good contition - there was no slop in the steering wheel. If there's something else you want to to check let me know.
Can you get me a shipping quote, if youa re willing to ship it. 63043.

Thanks!
91 SS Pearl White
>Apexi Power Intake, HKS 3" Downpipe, Saab TMIC, Blitz SS bpv, STi Shifter and Bushing, WRX Suspention and Clutch, Whiteline RCA Kit, Whiteline Steering Rack Bushings (sport), Ghetto HoodScoop
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

jefferson wrote:
If they are truly the factory fogs I will take them along with the switch.

Let me know.

Jeff
Couldn't find a fog switch on the dash, so they must be signals, sorry.
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

boro wrote:
Gristle wrote:
boro wrote:does the rack have inner tie rods that are in good condition?
They seem to be in good contition - there was no slop in the steering wheel. If there's something else you want to to check let me know.
Can you get me a shipping quote, if youa re willing to ship it. 63043.

Thanks!
Looks like around $25 ~ $28 for UPS Ground.
Top
pw422
Second Gear
Posts: 310
Joined: Wed Oct 06, 2004 1:48 am
Location: Boston/Quincy Ma

Post by pw422 »

you still have the passenger side fender? any rust and any dents ?
91 rio red ss 5mt
94 legacy wagon gt
95 impreza ej20 swapped
Top
bepa
Second Gear
Posts: 523
Joined: Sun Jun 25, 2006 1:20 am

good luck

Post by bepa »

as the saying goes if you were closer,

anyway was looking for a motor, just the cost of shipping would be to great.

be well, bepa
91 SS/ 01 MB ML 55
Bronx, NY.
Top
boro
Second Gear
Posts: 280
Joined: Thu Jun 15, 2006 3:36 am
Location: St.Louis, MO
Contact:
Contact boro

Post by boro »

Gristle wrote:
Looks like around $25 ~ $28 for UPS Ground.
When ever you're ready then.
91 SS Pearl White
>Apexi Power Intake, HKS 3" Downpipe, Saab TMIC, Blitz SS bpv, STi Shifter and Bushing, WRX Suspention and Clutch, Whiteline RCA Kit, Whiteline Steering Rack Bushings (sport), Ghetto HoodScoop
Top
BAC5.2
Moderator
Moderator
Posts: 9026
Joined: Thu Jan 29, 2004 8:47 pm
Location: Maryland www.andrewtechautomotive.com
Contact:
Contact BAC5.2

Post by BAC5.2 »

If you've still got the car I might be interested in the Brake Master Cylinder if it doesn't have too many miles on it.

Let me know!
2009 Outback 2.5XT. 5MT. Satin White Pearl.
2009 Impreza 2.5i Premium. Blue.

[quote="scottzg"]...I'm not a fan of the vagina...[/quote][quote="evolutionmovement"]This will all go much easier if people stop doubting me.[/quote]
Top
Ej22TIM
First Gear
Posts: 137
Joined: Mon Sep 25, 2006 4:50 am
Location: Mound Mn

Post by Ej22TIM »

I will take the RF fender if there is no rust!
Tim
93 Legacy SS Winestone 5mt swapped
Megan Racing Bellmouth 13psi
WRX Intercooler and Hoodscoop
JDM ej20G DOHC head swap, wiseco pistons and td04 in the making.
Top
Ej22TIM
First Gear
Posts: 137
Joined: Mon Sep 25, 2006 4:50 am
Location: Mound Mn

Post by Ej22TIM »

also, if it has abs, I will take the pump. it its non abs I will take the propotioning valve.
Tim
93 Legacy SS Winestone 5mt swapped
Megan Racing Bellmouth 13psi
WRX Intercooler and Hoodscoop
JDM ej20G DOHC head swap, wiseco pistons and td04 in the making.
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

BAC5.2 wrote:If you've still got the car I might be interested in the Brake Master Cylinder if it doesn't have too many miles on it.

Let me know!
I do have the brake master, but have no clue as to how long it may have been on the car. The car has around 160k miles.
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

Ej22TIM wrote:also, if it has abs, I will take the pump. it its non abs I will take the propotioning valve.
It's an ABS car. You want the big 'ol pump/distribution block thing? How about $35 plus shipping?
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

Ej22TIM wrote:I will take the RF fender if there is no rust!
Looks pretty rust free. If you give me an email addy I can send you pics.
Top
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:
Contact vrg3

Post by vrg3 »

Any chance you still have the pressure sensor mounted on the passenger-side strut tower?
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

vrg3 wrote:Any chance you still have the pressure sensor mounted on the passenger-side strut tower?
The MAP sensor? I may have given it to the guy who purchased the engine. I'll check tomorrow.
Top
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:
Contact vrg3

Post by vrg3 »

Yep, the MAP sensor. Thanks for checking.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
Top
Motohead
In Neutral
Posts: 3
Joined: Wed Dec 05, 2007 9:35 pm
Location: Edmonton, Alberta Canada

Post by Motohead »

Hi, do you have a passenger side front control arm? I bent mine from hitting a snow buried curb at a mall..

also do you happen to know if the control arm off your car will fit a 90 NA wagon? I'm betting it will.

anyway please PM me price, availiblity and if you can ship it to Canada. Thanks!
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

Bumpo and all PM's answered ( I think!)
Top
Gristle
In Neutral
Posts: 27
Joined: Mon Feb 04, 2008 1:59 am
Location: North Bend, WA
Contact:
Contact Gristle

Post by Gristle »

Bumperooni for Friday. Also added more parts to the list.
Top
Post Reply

Return to “Parts Shed”