Need a technical drawing

BAC5.2 · Post by **BAC5.2** » Fri Mar 07, 2008 4:05 pm

I need an engineering technical drawing of a Legacy Turbo rotor.

Has anyone seen one or have one?

Thanks!

Post by **Legacy777** » Fri Mar 07, 2008 7:37 pm

I don't think you'll find one. Your best bet would be to contact brembro or another brake rotor manufacturer/vendor.

Are you looking for certain dimensions?

skid542 · Post by **skid542** » Fri Mar 07, 2008 8:32 pm

It shouldn't be too hard to create one, particularly for the front rotor.

However, I'm guessing you are talking about the rears since I know you've got your cool side project going on

.

Which dimensions are you looking for or would need on a drawing?

I ask because I have access to a couple of modeling programs....

jamal · Post by **jamal** » Fri Mar 07, 2008 10:22 pm

There's a dba drawing of the front rotor in the sticky (just click on the dimensions). I don't have one for the rear but it would be pretty easy to get most of the dimensions from the 290x18 rotor.

BAC5.2 · Post by **BAC5.2** » Sat Mar 08, 2008 3:20 pm

Thanks guys,

I got it. I just had to confirm a few issues that we were having. I ended up drawing my own tech. drawing (by hand! OG style). Everything turned out exactly as I expected, so no worries.

Can you guys keep a secret?

Arctic Assassian · Post by **Arctic Assassian** » Sun Mar 09, 2008 9:55 am

only if you PM me.

skid542 · Post by **skid542** » Mon Mar 10, 2008 5:29 am

^^^ Agreed.

BAC5.2 · Post by **BAC5.2** » Mon Mar 10, 2008 6:45 pm

Nevermind then. I'll wait until we go to production before posting a teaser of the 316 kit.

skid542 · Post by **skid542** » Mon Mar 10, 2008 8:00 pm

Ahhh, how are you going to do that to us. You can atleast post an un-titled picture. I assume it works?

When is production going to start, is it for the 316 and the 290?

BAC5.2 · Post by **BAC5.2** » Mon Mar 10, 2008 10:04 pm

Well, you guys said you couldn't be trusted...

Does it work? Still pre-production, can't disclose.

What should you expect?

IF the kit goes to production... Both might go.

skid542 · Post by **skid542** » Mon Mar 10, 2008 10:46 pm

Hahaha....

I know you can trust me. And I'm really hoping this goes to production. I'll be upgrading to WRX fronts here in a few weeks and need something to bring the balance back.

If both kits need tested, I already have 290 rotors from an 05 LGT.....

BAC5.2 · Post by **BAC5.2** » Mon Mar 10, 2008 10:52 pm

Lol, thanks for the offer Lee. I've got the kits in the back of the Forester. I'll be testing and approving both options.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Need a technical drawing

Need a technical drawing