91/94 turbo Legacy parts, almost anything you need

m44offroad · Post by **m44offroad** » Sun Feb 24, 2008 3:47 am

can you get me a price and shipping on a useable 4.11 rear diff, preferably one that the drain and fill plugs can be removed on.

Legacy Rally Guy · Post by **Legacy Rally Guy** » Sun Feb 24, 2008 8:39 pm

Do you have the intake boot that has the nipples for recirculated bypass air? *third intake hose from MAF sensor..*

shipped to 63532

thanks

m44offroad · Post by **m44offroad** » Mon Feb 25, 2008 12:12 am

i should add the diff i need is for a 1990, n/a, 5mt and open diff is fine as long as it works

greatjorb88 · Post by **greatjorb88** » Mon Feb 25, 2008 10:39 am

Speedometer cable for a 5mt?

greatjorb88 · Post by **greatjorb88** » Mon Feb 25, 2008 10:50 am

Oops. Nevermind

Blackbart · Post by **Blackbart** » Wed Feb 27, 2008 1:53 am

m44offroad, The only 4.11 rear I have is a JDM VLSD with axles. If oyur diff is broken I can send you parts to fix it, I have all the parts except the ring and pinion. You can have the internals with the spider gears for $10 if that will fix it.

Legacy Rally Guy, No more of those elbows for now.

m44offroad · Post by **m44offroad** » Wed Feb 27, 2008 3:40 am

Blackbart wrote:m44offroad, The only 4.11 rear I have is a JDM VLSD with axles. If oyur diff is broken I can send you parts to fix it, I have all the parts except the ring and pinion. You can have the internals with the spider gears for $10 if that will fix it.

Legacy Rally Guy, No more of those elbows for now.

actually its the bearings that are going and the plugs on the cover are seized. the po had drilled a hole in the diff cover and put a 1/4 bolt in the hole and at the moment i want the whole assembly so i can slowly build up a lsd for it with the current case

shemoves · Post by **shemoves** » Fri Mar 14, 2008 7:31 pm

Hey, I am in need of an upper radiator hose for a '92 SS.

Tleg93 · Post by **Tleg93** » Fri Mar 14, 2008 8:32 pm

I still need interior parts and wheels (not legacy stock though). I am also in need of a 91 deck lid or just the reflectors.

GodSquadMandrake · Post by **GodSquadMandrake** » Sat Mar 15, 2008 4:29 am

Do you have an airflow sensor for a 91 SS automatic? It's the hot film type.

klin7757 · Post by **klin7757** » Sat Mar 15, 2008 8:02 am

do you have either a new or good condition used knock sensor? preferably
one with a white connector. thanks.

Blackbart · Post by **Blackbart** » Sun Mar 16, 2008 9:01 pm

I have the radiator hose, turbo MAF, misc interior parts, and a set of aftermarket 15" wheels. Got some knock sensors here, I will ahve to look for one with the white connector (I doubt it)
I will send PM's when I get sorted out. Things got out of hand again.

PhyrraM · Post by **PhyrraM** » Mon Mar 17, 2008 11:04 pm

Got a turbo flywheel in resurfaceable condition?

555BCTurbo · Post by **555BCTurbo** » Tue Mar 18, 2008 12:19 am

Any luck finding me an AWIC inlet hose...or 93+ shift linkage?

Blackbart · Post by **Blackbart** » Thu Mar 20, 2008 2:40 pm

PhyrraM, I have an SS flywheel here, make an offer.

555BCTurbo,I took a pic of the AWIC tube, send me your email address for the pic.

klin7757, I have a good knock sensor here but not with the white connecter.

GodSquadMandrake, got the MAF, PM coming.

Tleg93, send me a PM with the list of interior parts that you need, I have a good rear 91 reflector center panel.

shemoves, I have the upper hose, PM coming

dman · Post by **dman** » Tue Mar 25, 2008 1:54 am

Need a hood off ABM 94 ss shipped to 55403

Blackbart · Post by **Blackbart** » Tue Mar 25, 2008 1:57 am

No AMB hoods (except for the one on my car

) I have other colors.

dman · Post by **dman** » Tue Mar 25, 2008 2:41 am

I'm in no rush

If you get your hands on one and don't keep it as a spare - pm me

SubaruNation · Post by **SubaruNation** » Tue Mar 25, 2008 3:57 am

dman wrote:I'm in no rush
If you get your hands on one and don't keep it as a spare - pm me

you could always paint another hood ABM

and Blackbart I PM'd you

fngearhead · Post by **fngearhead** » Tue Mar 25, 2008 4:41 am

I need a stock front turbo swaybar

Brian

SubaruNation · Post by **SubaruNation** » Thu Apr 17, 2008 7:25 am

wow it's been awhile.
blackbart, just seeing if you have a bypass valve at all.
you've probably got your hands full with that engine that guy sent you.
hope that is going well.

thanks

91legacyawdturbo · Post by **91legacyawdturbo** » Tue Apr 29, 2008 6:58 am

BlackBart, Would you by chance have a hood scoop for a 91 SS?? color doesn't matter

bmxpunk · Post by **bmxpunk** » Thu May 01, 2008 2:16 am

Have any rear 3.9 rear lsd? or the long shot...IAC for an ej20k/h/maybe G

Blackbart · Post by **Blackbart** » Thu May 01, 2008 3:47 am

I am currently having MAJOR computer problems, hope to get back soon.
I have a hood scoop and possibly a 3.90 LSD, I am out of town at the moment, I can try to check this weekend.

91legacyawdturbo · Post by **91legacyawdturbo** » Fri May 02, 2008 1:29 am

Thanks for the update, hope the computer problems clear out.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

91/94 turbo Legacy parts, almost anything you need