I plan to be putting a EJ22T into a RX and I am working on the harness.
I found all of the connections to the stock boost controller but one. This the white connector with a black wire and a white wire. Where does the other part go?
BW
help with stock boost controller wiring
Moderators: Helpinators, Moderators
What devices are you missing?
That part of the engine bay has the boost control solinoid (YR, BW), The pressure exchange solinoid (YR, GY), and the pressure sensor (W, R, B).
If the harness is from an automatic car there will also be a resistor (BY, G) for the transmission control.
That part of the engine bay has the boost control solinoid (YR, BW), The pressure exchange solinoid (YR, GY), and the pressure sensor (W, R, B).
If the harness is from an automatic car there will also be a resistor (BY, G) for the transmission control.
'93 Winestone SS Auto, '91 Pearl White SS.
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
-
- Fifth Gear
- Posts: 3526
- Joined: Wed Jul 18, 2007 5:07 pm
- Location: Whammy!