what you say~!

92ss satinsvoice · Post by **92ss satinsvoice** » Mon Apr 07, 2008 4:31 am

ive been driving around for two days now with my AVO down pipe on. only problem is..... it wont hook up to the rest of my exhaust.... so ya, its really f***in loud.

so i need to come up with the rest of the exhaust quick cause im not going to put that damn stock exhaust back on.

right now im thinking on a cheap ebay cat back or invidia N1 with the resonator.

money itsn't too big a problem.

555BCTurbo · Post by **555BCTurbo** » Mon Apr 07, 2008 11:00 pm

Those Fleabay jobs aren't half bad from what I've seen

livestrong14 · Post by **livestrong14** » Mon Apr 07, 2008 11:05 pm

Yeah, an Ebay catback is a really good, cost effective setup. The quality isn't that bad. Or look for a used cat-back on NASIOC or craigslist.

BXSS · Post by **BXSS** » Tue Apr 08, 2008 12:14 am

+1 on Ebay exhaust.

Nice welds (the one I saw looked to be TIG welded with stainless rods), 3-series stainless steel tubing, mandrel bends + they are super cheap.

93forestpearl · Post by **93forestpearl** » Tue Apr 08, 2008 6:42 am

Been rocking the ebay exhaust for a year and a half. Aside from a tad bit of surface rust on the tip after the winter, its been flawless. The surface rust comes off in two seconds with some chrome cleaner.

Its hard to argue with $325 shipped (what I paid) for a decent quality. Its not as nice as a name brand setup, but imho, who cares. Exhaust carries nasty gases and get dirty. Just add a little to the midpipe or axle back and you're good to go, like taco bell.

asc_up · Post by **asc_up** » Tue Apr 08, 2008 7:36 am

Yeah I've had an E-bay downpipe for about 6 months and it shows no signs of rust or falling apart in any way.

I say go for it.

92ss satinsvoice · Post by **92ss satinsvoice** » Thu Apr 10, 2008 3:50 am

well, i ended up buying and invidia. wish i would of looked at this earlier. like two days ago.

it will be here this friday or next monday. i dont drive my car too much around town because of the noise.

92ss satinsvoice · Post by **92ss satinsvoice** » Sun Apr 13, 2008 9:19 pm

9 days on an open down pipe.

i got my exhaust but now i have to drop the car off tomarow for it to get fitted. yay!

Adam West · Post by **Adam West** » Sun Apr 13, 2008 9:27 pm

Darn! Anyway you could video tape how loud the car is and post on line? I may have a similar situation and would like to know what it's like...

Thanks in advance,
AW

92ss satinsvoice · Post by **92ss satinsvoice** » Fri Apr 18, 2008 9:59 pm

ive got my exhaust on now. but i can tell you it sounded like a helicopter.

really really really loud. its not the best of idea's unless you have the rest or the exhaust waiting to be fitted.
but who am i kidding, fuck it!

thats the only reason i did it.

92ss satinsvoice · Post by **92ss satinsvoice** » Fri Apr 18, 2008 11:19 pm

here are some pic's of the exhaust. Avo down pipe & the invidia N1 cacat back.

[/URL]

Adam West · Post by **Adam West** » Fri Apr 18, 2008 11:30 pm

That is freaking awesome!

93forestpearl · Post by **93forestpearl** » Fri Apr 18, 2008 11:35 pm

Nice. Its too shiny for my taste

Looks like a flux core welder was used for your IC plumbing.

SubaruNation · Post by **SubaruNation** » Sat Apr 19, 2008 1:38 am

you going to caver that turbo with anything

how hot does that plastic get?

92ss satinsvoice · Post by **92ss satinsvoice** » Sat Apr 19, 2008 7:49 pm

93forestpearl wrote:Nice. Its too shiny for my taste

Looks like a flux core welder was used for your IC plumbing.

yep it looks like garbage.

eh the turbo, its not gonna be there for too much longer so probley not.

it melted a little, but those are the connectors for when i had and automatic tranny.

92ss satinsvoice · Post by **92ss satinsvoice** » Sat Apr 19, 2008 7:55 pm

heres a pic of the engine bay.

livestrong14 · Post by **livestrong14** » Sun Apr 20, 2008 12:07 am

Looking good Andrew! Very tidy exhaust job! With a drop, and some good rubber, she is going to look mint!

555BCTurbo · Post by **555BCTurbo** » Sun Apr 20, 2008 12:40 am

Watch your bumper cover, the pics make it appear as though the muffler is touching it.

92ss satinsvoice · Post by **92ss satinsvoice** » Sun Apr 20, 2008 9:24 am

its not touching. if it was it would rattle. davids was touching and it rattled.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

what you say~!

what you say~!