Valve Cover Gaskets.

Ej22TIM · Post by **Ej22TIM** » Tue May 13, 2008 8:28 pm

I need valve cover gaskets for the V1 Jdm DOHC heads. where would I go about getting these? part #?

thanks,

Tim

John Drivesabox · Post by **John Drivesabox** » Tue May 13, 2008 10:44 pm

I thing '98 LGT would work. Anyone care to elaborate?

Ej22TIM · Post by **Ej22TIM** » Tue May 13, 2008 11:56 pm

thanks, I will see if that will work, I assume the 98 lgt timing belt is what I would use for a timing belt as well?

AWD_addict · Post by **AWD_addict** » Thu May 15, 2008 10:37 pm

Please try this out, I have yet to find a conclusive answer about the valve cover gaskets.

The timing belt for V1 EJ20G heads is part number 13028AA072.

SubaruNation · Post by **SubaruNation** » Fri May 16, 2008 3:58 am

John Drivesabox wrote:I thing '98 LGT would work. Anyone care to elaborate?

lol gaskets and 98' LGT should never be used in the same sentence

John Drivesabox · Post by **John Drivesabox** » Fri May 16, 2008 5:33 am

This is funny, I actually "ordered" these the other day from AutoZone. But you know how most of those places are, they only operate via year/make/model/engine.

So, my dumb ass tells the guy "eh, it's a '95 Subaru Impreza, it has a 2.0L motor, just order the one's for the 2.2, those should work". And then as I'm walking out the door I realize, "hey dumbshit, you just ordered USDM SOHC gaskets for a JDM DOHC motor" It's the story of my life with cars, I guess.

At least they ordered them without making me pay, they never will see that $30.

SubaruNation · Post by **SubaruNation** » Fri May 16, 2008 2:55 pm

ha i did that to an o'rielys <---or something
they celled me like 5 times telling me the part was in.

lol i never picked it up

Ej22TIM · Post by **Ej22TIM** » Fri May 16, 2008 4:22 pm

picked up gaskets for the heads, I went to the subaru dealership and got a discount with the minnesota subaru club.
I will get a part number later but any phase 1 usd gaskets work.

and awd_addict great info, thank you!

AWD_addict · Post by **AWD_addict** » Sat May 17, 2008 7:10 am

You're welcome!

Please let us know how the gaskets work out.

keirnna · Post by **keirnna** » Sat May 17, 2008 11:56 am

There are also 3 different types of gasket sets for for the EJ20G heads. Subaru here can't tell you which gaskets to order by just the vin number you have to choose which is correct based on the old gaskets.

AWD_addict · Post by **AWD_addict** » Sat May 17, 2008 8:19 pm

So the gaskets were different between individual cars of the same model?
You can't order 1989 Legacy RS Ver. 1 EJ20G gaskets from Subaru?

The guys at Super Autobacs (Tokyo Bay) said they needed the VIN to order the correct gaskets, but there was also something about different versions. They didn't speak perfect English and I didn't speak any Japanese, so something was probably lost in translation.

Ej22TIM · Post by **Ej22TIM** » Sun May 18, 2008 12:11 am

sorry about the delay guys, I havnt been able to grab the part number but I did put the gaskets on and they are a perfect fit.

kind of off topic but can someone email me pictures of what the camgears for the 20g look like or more importantly the camgear that will work with my SS cam and crank sensors.

timsayen@yahoo.com

thanks guys!

keirnna · Post by **keirnna** » Sun May 18, 2008 12:46 am

AWD_addict wrote:So the gaskets were different between individual cars of the same model?
You can't order 1989 Legacy RS Ver. 1 EJ20G gaskets from Subaru?

The guys at Super Autobacs (Tokyo Bay) said they needed the VIN to order the correct gaskets, but there was also something about different versions. They didn't speak perfect English and I didn't speak any Japanese, so something was probably lost in translation.

Yeah the difference I know of is in the way the webbing (not the right word, but you get the idea) comes into the head. Some heads had more lines of webbing and others had less. There are also different gaskets for the spark plug holes, but I think they are all the same for the EJ20G.

AWD_addict · Post by **AWD_addict** » Sun May 18, 2008 8:50 pm

Are the spark plug gaskets the same as '98 USDM DOHC? Or the same as another US model?

keirnna · Post by **keirnna** » Mon May 19, 2008 12:59 am

By V1 do you mean WRX or Legacy heads?

AWD_addict · Post by **AWD_addict** » Tue May 20, 2008 9:22 am

AWD_addict wrote: 1989 Legacy RS

By V1 I mean that the heads have HLAs.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Valve Cover Gaskets.

Valve Cover Gaskets.