FREE-Wrecked 1991 Turbo Sedan

head2wind · Post by **head2wind** » Sun Oct 05, 2008 12:54 am

Located Bellingham WA. its up on a trailer as all the running gear is gone. front damaged in front of the strut towers. firewall back is in good to excellent condition. engine and trans are gone. interior is mostly there and in good condition.

pictures here:
http://picasaweb.google.com/Head2Wind/91Subie#

I want this car to go whole, I will not part it any more. lots of good parts still here so someone local needs to get this.

I can offer to pull it to your location with my truck and trailer for the cost of fuel within 100 mile or so of 98226. we could also transfer it to another trailer if you are coming from farther away.

Ken
360.927.1954

In 2 weeks if someone doesn't take it i will be taking it to the crusher.

kleinkid · Post by **kleinkid** » Sun Oct 05, 2008 2:23 am

I know you said no parting out, but, if that chrome strip around the rear bumper is any good, and you can get it off ok, I would buy that from you, and come and get it, or meet you at the Oak Harbor campus when you are there. Also, I am looking for some DOHC heads to go with a EJ20R intake manifold I am getting. Later, John.

head2wind · Post by **head2wind** » Sun Oct 05, 2008 2:45 am

you are welcome to come get it. if I have time I will look at getting it off and how much of a PITA it will be.

Looks like the whole rear bumper has to come off then the skin, then its possible to get to that trim...... if it stops raining long enough I will get out there and pull it. otherwise its up to you.

give me a call and we can figure something out.

Ken
360.927.1954

dropdfocus · Post by **dropdfocus** » Sun Oct 05, 2008 3:08 am

kleinkid wrote:Also, I am looking for some DOHC heads to go with a EJ20R intake manifold I am getting. Later, John.

PM'd you about heads I have available. (didn't mean to cut in on the free car post)

head2wind · Post by **head2wind** » Sun Oct 05, 2008 3:18 am

to cut back in, I too have a set of EJ20G heads, manifold, injectors, belt covers that I don't think that I am going to get to..... will they work for what you are doing John?

dropdfocus · Post by **dropdfocus** » Sun Oct 05, 2008 3:20 am

That's what he's looking for. I have USDM DOHC heads.

head2wind · Post by **head2wind** » Sun Oct 05, 2008 3:24 am

what vintage USDM heads ????

dropdfocus · Post by **dropdfocus** » Sun Oct 05, 2008 3:25 am

EJ25D heads & intake manifold from a buddy.

head2wind · Post by **head2wind** » Sun Oct 12, 2008 5:46 am

sawsall starts next weekend..... I will consider pulling parts for anyone that is interested. It has a set of nice doors, trunk, rear bumper/wrap, full interior, main wire harness......

ya want these? come get them off the car before I have to make them go away to the crusher

evolutionmovement · Post by **evolutionmovement** » Sun Oct 12, 2008 6:09 am

FYI, the chrome bumper strip should come right out if you can get a screwdriver behind it near one of the ends and pry a little of it out, then you can just pull the thing off going around the car. It's just double-sided taped.

head2wind · Post by **head2wind** » Sun Oct 12, 2008 6:14 am

he decided to go with a new one.

ericem · Post by **ericem** » Sun Oct 12, 2008 5:07 pm

You can get just the chrome strip?? Perfect!

kimokalihi · Post by **kimokalihi** » Mon Oct 13, 2008 12:39 am

I would take the car but as far as I know all I need is the wing. My wing the paint is chipping off. Will the junkyards take this car without charging you? Or will they take it at all?

head2wind · Post by **head2wind** » Mon Oct 13, 2008 5:12 am

I can pull the wing. you pay for shipping.

kimokalihi · Post by **kimokalihi** » Mon Oct 13, 2008 1:17 pm

I will gladly pay for shipping as long as the paint on the wing is in good condition. I'll even pay you for the wing. I need the mounting hardware for it too. The guy sold me the car without the nuts or whatever. You can pull one side of the wing up off the car with your hand.

AWD_addict · Post by **AWD_addict** » Tue Oct 14, 2008 4:02 am

You still have this car? PM sent about parts.

ScottyS · Post by **ScottyS** » Fri Oct 17, 2008 4:43 am

That is really a shame you're not closer!

If you are at all interested in pulling the rear drivers tailight assembly, my white 91 SS needs a crack-free one. Let me know if and how much.

head2wind · Post by **head2wind** » Fri Oct 17, 2008 5:47 pm

I will pull it and put your name on it, I will PM you a price.

I just found out that I need to cut it into pieces to get rid of it. So I will be pulling all the good stuff off and offering it up. I was trying to avoid all the work, however no one has stepped up for the whole thing.

ScottyS · Post by **ScottyS** » Fri Oct 17, 2008 5:50 pm

OK, thanks!

pw422 · Post by **pw422** » Sat Oct 18, 2008 1:22 am

Are willing to cut out the rear quarter panels and ship?

head2wind · Post by **head2wind** » Tue Oct 21, 2008 6:04 am

IF and it is big IF I even consider trying to cut and ship the rear quarters I need to know where you would like them cut at.

head2wind · Post by **head2wind** » Tue Oct 21, 2008 6:06 am

ScottyS wrote:That is really a shame you're not closer!

If you are at all interested in pulling the rear drivers tailight assembly, my white 91 SS needs a crack-free one. Let me know if and how much.

lense is out, I will prep for shipping as soon as I know where it is going. $15 for the fixture + real shipping

pw422 · Post by **pw422** » Tue Oct 21, 2008 11:16 am

pm ya

ScottyS · Post by **ScottyS** » Tue Oct 21, 2008 5:53 pm

head2wind wrote:
ScottyS wrote:That is really a shame you're not closer!

If you are at all interested in pulling the rear drivers tailight assembly, my white 91 SS needs a crack-free one. Let me know if and how much.
lense is out, I will prep for shipping as soon as I know where it is going. $15 for the fixture + real shipping

Yeah! pm INCOMING.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

FREE-Wrecked 1991 Turbo Sedan

FREE-Wrecked 1991 Turbo Sedan

no parts

Re: no parts