Ok, so I just bought a td04. I was removing the coolant banjo from the turbo and I've noticed that one of the washer is a bit damaged.
These washers don't seem to be usual ones. What kind of washer should I use and where can I find them?
Thanks
td04 coolant banjo washer
Moderators: Helpinators, Moderators
-
flatoutfred
- First Gear
- Posts: 59
- Joined: Sat May 24, 2008 10:34 pm
- Location: quebec city canada
td04 coolant banjo washer
Legacy turbo, desnorkled, intercooled, TD04, Borla catback, urethane mounts, wrx rear brakes.
-
94SS_Canada
- Third Gear
- Posts: 851
- Joined: Mon May 12, 2008 4:19 am
You'll want to stick with copper gaskets. You can get new ones from any local auto parts store. While its nice to have ones that fit perfect it's not totally necessary. The pressure from the banjo bolt is enough to make a less than perfect fitting banjo bolt washer/gasket seal nicely.
If all else fails call Subaru and get new ones from them if you have any doubts about the fitment of aftermarket gaskets. They should be around $3.00 each.
If all else fails call Subaru and get new ones from them if you have any doubts about the fitment of aftermarket gaskets. They should be around $3.00 each.
91 Legacy SS
98 OBS-T
98 OBS-T