any ideas why my alternator belt....

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
_Aramchek_
First Gear
Posts: 126
Joined: Wed Dec 21, 2005 10:46 pm

any ideas why my alternator belt....

Post by _Aramchek_ »

Won't stay tight?
Top
jefferson
Third Gear
Posts: 768
Joined: Sat Dec 16, 2006 4:41 am
Location: Parkville, Mo.

Post by jefferson »

First of all make sure your crank pulley is not loose and messing things up. If it is loose lets just hope it has messed up your belt tension. Also make sure you are tightening both bolts on the alternator, the pivot bolt and the bolt in the adjuster. While you are at it make sure you ps pump is secure. That all I can think of.

Jeff
91 Black SS 5spd. Edm lights, wrx gauges in dash, 45 degree airbox, cryoed drilled and slotted brakes. Invidia divorced downpipe with custom stainless exhaust. To be installed, aluminum a-arms, manual belts, awic.
Top
_Aramchek_
First Gear
Posts: 126
Joined: Wed Dec 21, 2005 10:46 pm

Post by _Aramchek_ »

I'll check the crank pulley,everything else has been tightened multiple times.
Top
sebazztard
First Gear
Posts: 86
Joined: Fri Mar 28, 2008 7:50 am

Post by sebazztard »

maybe the bolt/nut is stripped on the adjuster and coming loose?
Top
Post Reply

Return to “Engine”