Alright, I have a very quick question, which I just need some confirmation on. Im replacing the auto in my 91 ss, and since its so difficult to track down these trans anymore, I was wondering if it would be a direct bolt in from any other automatic subaru (assuming that I have the rear diff form the matching tranny).
So would it be possible to use anything from a 91 legacy L transmission, all the way up to say a 01 RS transmission? Even possibly one from a wrx?
Thanks
Automatic Trans compatibility
Moderators: Helpinators, Moderators
You can use some of the newer AT's, but there's some minor things that don't make them a direct bolt on.
An At from a 92-94 Legacy n/a is a direct bolt in, and you don't even need to change the rear diff since it's the same.
An At from a 92-94 Legacy n/a is a direct bolt in, and you don't even need to change the rear diff since it's the same.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
Spitfire999
- First Gear
- Posts: 71
- Joined: Fri Aug 10, 2007 3:53 pm
Only the rear was vlsd.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm