EJ22T stroked to 2.5?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
93GCsedan
First Gear
Posts: 66
Joined: Fri Oct 03, 2008 12:54 am
Location: Georgia

EJ22T stroked to 2.5?

Post by 93GCsedan »

i will be stroking my 2.2 with 2.5 crank and aftermarket 2.5 rods but i am stuck with what to go for pistons. So was wondering if it was possible to bore it to the 2.5L's bore and use forged 2.5 pistons. I am wondering if the cylinder walls will be to thin? Any input will be appreciated.
Top
tturnpaw
First Gear
Posts: 208
Joined: Sat Dec 27, 2008 4:15 am
Location: Marysville, WA

Post by tturnpaw »

I've seen them sleeved but my guess since it's 2.6mm larger bore would require a .100 overbore which is huge and would force you to sleeve with Sti pistons. Wisecos 22t work but the sti setup is also 1mm shorter so you're looking at thinner head gaskets with 25 rods and crank to say the least. You're best bet for that setup sti rods and crank would be the wisecos and deal with the 1mm shorter stroke with a thinner hg.
Top
tturnpaw
First Gear
Posts: 208
Joined: Sat Dec 27, 2008 4:15 am
Location: Marysville, WA

Post by tturnpaw »

Check cimotorsports.net the have ej22t wisecos for this setup.
Top
93GCsedan
First Gear
Posts: 66
Joined: Fri Oct 03, 2008 12:54 am
Location: Georgia

Post by 93GCsedan »

Thanks for the replys guys, it really put me in the right direction.
Top
Post Reply

Return to “Engine”