98 2.5L fuel rails on 91SS?

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
macipusy
Third Gear
Posts: 787
Joined: Wed Aug 22, 2007 9:27 pm
Location: Denver, CO

98 2.5L fuel rails on 91SS?

Post by macipusy »

I just got back from my buddies subaru shop and they hooked me up with a full set of 98 2.5L legacy fuel rails with the red injectors. They said that they should work...I was a little hesitant since doing research on here and finding that the 92-94 N/A rails are the correct swap over for a 91 SS.

Can anybody confirm if the 98 2.5L rails would work on the 91 SS....I know that the STI 550cc injectors I have do fit in the 98 2.5L rails.
maciek puszynski

01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d


2.36L Turbo - RSTi Build
PhyrraM
Fourth Gear
Posts: 1980
Joined: Thu Aug 11, 2005 4:34 pm
Location: Lake Elsinore, CA

Post by PhyrraM »

The rails will not work with an EJ22T intake manifold.

You will still need the EJ22 N/A rails.

Those rail are, however, what you would need to install STI injectors on an EJ20G intake manifold.
'93 Winestone SS Auto, '91 Pearl White SS.
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
macipusy
Third Gear
Posts: 787
Joined: Wed Aug 22, 2007 9:27 pm
Location: Denver, CO

Post by macipusy »

Cool, thanks

Just went out and got a set of the 92-94N/A rails without all of the hard lines under the manifold....hopefully that is all I needed.
maciek puszynski

01 Impreza | v6 STi RA | 5mt | ej236t
93 Legacy Turbo | TW | 4eat | ej22t
16 WRX | 6mt | fa20
98 Legacy GT | wagon | 5mt | ej25d


2.36L Turbo - RSTi Build
Post Reply