Where the power meets the road.
Moderators: Helpinators , Moderators
chayesfss
In Neutral
Posts: 17 Joined: Fri Aug 25, 2006 4:22 amLocation: Connecticut, USA
Post
by chayesfss Mon Feb 23, 2009 2:33 pm
Fits between the caliper and the pads, what the heck is it for and is it needed?
tahiti350
Third Gear
Posts: 874 Joined: Fri Feb 03, 2006 7:17 pmLocation: Spanaway/Tacoma, WA
Post
by tahiti350 Mon Feb 23, 2009 3:14 pm
that's an anti-rattle shim. probably not required for operation, but you may get more brake squeal...
'90 Bermuda Blue L Wagon (Wife's),
chayesfss
In Neutral
Posts: 17 Joined: Fri Aug 25, 2006 4:22 amLocation: Connecticut, USA
Post
by chayesfss Mon Feb 23, 2009 3:17 pm
I figured as much but with the pad sooo tight on the fingers with that shim I think I'll pull it.
Legacy777
Site Admin
Posts: 27932 Joined: Tue Oct 15, 2002 11:37 amLocation: Houston, Tx
Contact:
Post
by Legacy777 Mon Feb 23, 2009 7:22 pm
Just put some disc brake quieter on the back of the pad. The stuff from CRC works better then the stupid shims...
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
chayesfss
In Neutral
Posts: 17 Joined: Fri Aug 25, 2006 4:22 amLocation: Connecticut, USA
Post
by chayesfss Mon Feb 23, 2009 7:59 pm
No, I'm talking about the little pad finger shims not the pad backing shims
tahiti350
Third Gear
Posts: 874 Joined: Fri Feb 03, 2006 7:17 pmLocation: Spanaway/Tacoma, WA
Post
by tahiti350 Tue Feb 24, 2009 4:46 am
Oh, then my statement is void...
'90 Bermuda Blue L Wagon (Wife's),
93forestpearl
Fifth Gear
Posts: 3043 Joined: Tue Jan 25, 2005 9:14 pmLocation: Twin Cities, MN
Post
by 93forestpearl Tue Feb 24, 2009 5:44 am
Do you use any synthetic brake caliper grease on namely the slides, but also those antirattle shims and the backs of the pads? If they are going really fast it sounds like they are dragging.
→Dan
