Engine Parts for sale! (Calgary, Alberta, Canada)

94SS_Canada · Post by **94SS_Canada** » Tue Dec 09, 2008 8:12 pm

EJ22T shortblock (Comes with Crank sensor)

Unknown mileage, Might Ship if the price is right, Its very Clean.

450$ OBO.

EJ25 Phase 2 Heads SOHC, No Sensor. They come from a 1998 2.5RS unknown mileage again. Best offer.

TurboXS 4" to 3" downpipe, Heatwrapped a bit 150$

3" mandrel bent exhaust, 100$

EJ22T Intake manifold, with injectors rails and fuel system, With Throttle Body, No wiring, 100$

Intake manifold that goes along with those heads, along with complete fuel system, 440cc WRX blue injectors, Throttle body, No wiring. 220$ OBO.

Legacy SS Exhasut headers, 70$, gutted WRX uppipe 30$

TD04 Turbo, good shape, 70$ (will throw in new up and down pipe gaskets.)

94 legacy SS Rad Nice shape With fans 70$

Ask for More engine Bay parts.

Right now everyything is together (Block and heads) but the mechanic did a good job in ripping everything apart.

Ebay Stage 2 Clutch comes with Clutch and pressure plate can come with flywheel for extra. 250$ Firm, 0 miles, just installed never saw Actual running moter....

Im going to keep all the 5 speed parts for now incase i come along something that i need those for.

If someone buys the EJ22T within the first week i will throw in another EJ22T block! That needs a rebuild and some new Studs but is all there! Now thats a deal!

Parts Are located Just South of Calgary, Alberta, Canada.

Call me Quinn at 403-616-5958 for inquires.

94SS_Canada · Post by **94SS_Canada** » Tue Dec 09, 2008 10:16 pm

If your looking for random parts not everything is posted so just drop me a line. Give me a call anytime today, will ship and package items upon Request!

Motivated Seller!

Saskatoon Subaru · Post by **Saskatoon Subaru** » Wed Dec 10, 2008 7:30 pm

Is the TD04 have a 90 degree inlet?

or do you have all the pipes for bolt on?

wtdash · Post by **wtdash** » Wed Dec 10, 2008 7:58 pm

Any wiring? Need the turbo harness-side connectors...not the whole harness or the sensors.

Sell 440 Injectors separate? Fit stock EJ22t Rails?

DOH! I just spent too much on a 3" TBE! Dang it!

And I need an excuse to ski Sunshine Village.....might just make a roadtrip out of it!

RJ93SS · Post by **RJ93SS** » Wed Dec 10, 2008 8:24 pm

PICS OF THE DOWNPIPE PLEASE AND SHIPPING QOUTE TO VAN

94SS_Canada · Post by **94SS_Canada** » Wed Dec 10, 2008 8:51 pm

Saskatoon Subaru wrote:Is the TD04 have a 90 degree inlet?

or do you have all the pipes for bolt on?

I can sell the TD04 with a 90 degree inlet, however its just a silcone elbow. Someone has already asked about it so ill give him first dibs, but i will keep you in mind!

94SS_Canada · Post by **94SS_Canada** » Wed Dec 10, 2008 8:56 pm

RJ93SS wrote:PICS OF THE DOWNPIPE PLEASE AND SHIPPING QOUTE TO VAN

Downpipe is in good shape, its a 4" turboXS to 3" downpipe, it needs to be extened for a typical exhaust or you need to find the race pipe or high flow cat. I can send the Downpipe Via greyhound, Please PM me your full shipping adresss for quotes.

Its basically the Same as that.

94SS_Canada · Post by **94SS_Canada** » Wed Dec 10, 2008 8:57 pm

wtdash wrote:Any wiring? Need the turbo harness-side connectors...not the whole harness or the sensors.

Sell 440 Injectors separate? Fit stock EJ22t Rails?

DOH! I just spent too much on a 3" TBE! Dang it!

And I need an excuse to ski Sunshine Village.....might just make a roadtrip out of it!

I go to Sunshine Quite often, The injectors are top feed and will not fit an EJ22T intake manifold!

I dont feel like hacking up my harness to sell, im just parting out the engine storing the car and starting over in the nice season again.

94SS_Canada · Post by **94SS_Canada** » Thu Dec 11, 2008 8:49 pm

Bump, feel free to pm me with any questions!

impreza_GC8 · Post by **impreza_GC8** » Sat Dec 13, 2008 7:48 am

Dang you always have things I want but you are all the way in Canada! I want that exhaust but I doubt its cheap to ship.

94SS_Canada · Post by **94SS_Canada** » Sun Dec 14, 2008 3:18 am

Yeah i dont think its worth it, But dang its a nice Exhaust. Will need some welding and extending to fit.

BUMP! pm me with offers or anything you need, just throw anything at me!

94SS_Canada · Post by **94SS_Canada** » Sat Dec 27, 2008 8:36 am

Bump, car is going out to my friends house where i will begin to part it, make me some offers guys, anything on the engine

SP-Boxer · Post by **SP-Boxer** » Sat Dec 27, 2008 5:04 pm

Hi,

Would you ship that shortblock overseas with normal post? (US postal)
And can you let me know how much that would cost?

I'm only interested in the two halves, no internals.

Saskatoon Subaru · Post by **Saskatoon Subaru** » Tue Feb 10, 2009 1:08 am

hey i'm looking for all exhaust parts from the heads to the turbo.

thanks, i can pick up, im from Saskatoon.

jaybirde508 · Post by **jaybirde508** » Sat Mar 14, 2009 10:21 pm

looking for the timming belt tenioner bracket broke one of the bolt holes in dissassembly Let me know ASAP please

-Jay

Muiretta · Post by **Muiretta** » Tue Mar 17, 2009 9:12 pm

Ok so do you know if the 22t shortblock works for a 92?
I will be needing one shortly?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Engine Parts for sale! (Calgary, Alberta, Canada)

Engine Parts for sale! (Calgary, Alberta, Canada)

still got parts?

Nice sellection