FS OR: Lots of parts.. Legacy, WRX, STI, RS and more.
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
FS OR: Lots of parts.. Legacy, WRX, STI, RS and more.
Here's what's available, and will ship if you need:
-'02 WRX EJ20 turbo short block $500 **SOLD**
-Link 44s plug and play standalone ecu for '02-05 WRX $500
-'02 WRX wagon seats rear, great shape $100
-'02 WRX front brake calipers $120
-'02 WRX Passenger airbag and seatbelts (4) $150
-'05 STi Left aluminum control arm $100
-'05 STi aluminum rear lateral links, 3 of 4. 2 fronts, 1 rear $130
-'02-05 STi replica rear spoiler, silver $150obo
-'02-05 WRX top feed injectors $100
-'02-05 WRX Top mount intercooler $50
-Ver 1-3 JDM Slanty IC boot underhood ducting $50
-'02-03 WRX gauge cluster $100
-'04-05 WRX TMIC "boot", underhood ducting, $50
- GT Spec Header/uppipe combo, fits WRX, STi or Legacy Turbo $175
-'99-01 2.5RS white face gauge cluster $75
-'96 Impreza Outback sport gauge cluster $50
-'00 2.5 RS 5 speed transmission, close ratio 4:11, $650
-'00 2.5 RS SOHC 2.5 L heads, a couple of bent valves, $250obo
-'00 2.5 RS fuel pump $25
-2.2 or 2.5 non turbo exhaust, cat back with performance muffler $175 **SOLD**
-JDM 2.5(EJ25) intake manifolds, w/harness, sensors, injectors $125 ea**1 left**
-'96 Impreza Outback sport wagon wiring harness $150
-'96 Impreza Outback sport wagon plastic trim, A/B/C pillar $120
-'96 Impreza Outback sport wagon carpet, grey $75. will also work in 2/4 doors.
-'93-01 Impreza wagon tail lights, no cracks $100 for the pair
-'93 Subaru Legacy Turbo white sedan doors (4) $125 ea, complete w/ door cards
-'93 Subaru Legacy Turbo rear deck lid with spoiler $175
-'93 Subaru Legacy Turbo rear bumper w/ beam, white $150
-'93 Legacy sedan Left tail light $40
-'93 Subaru Legacy Turbo seats $125pr
-'95-98 Subaru Legacy wagon rear hatch reflector $50
-'95-05 front and rear sway bars, L, RS, WRX, OBS models $25-50 ea
-Rear differentials- 3:90, 4:11, 4:44. R160 and R180 $150-500 **R180 SOLD**
-Manual Transmissions- 3:90, 4:11 AWD and FWD $350-750
-Buildable engine cores- 2.2, 2.5 SOHC and DOHC $150-350 including heads
-Suspension parts- control arms, lateral links, subframes..what did you bend in the snow??
Please post, pm or email me for more info or with any questions.
Thanks.
-'02 WRX EJ20 turbo short block $500 **SOLD**
-Link 44s plug and play standalone ecu for '02-05 WRX $500
-'02 WRX wagon seats rear, great shape $100
-'02 WRX front brake calipers $120
-'02 WRX Passenger airbag and seatbelts (4) $150
-'05 STi Left aluminum control arm $100
-'05 STi aluminum rear lateral links, 3 of 4. 2 fronts, 1 rear $130
-'02-05 STi replica rear spoiler, silver $150obo
-'02-05 WRX top feed injectors $100
-'02-05 WRX Top mount intercooler $50
-Ver 1-3 JDM Slanty IC boot underhood ducting $50
-'02-03 WRX gauge cluster $100
-'04-05 WRX TMIC "boot", underhood ducting, $50
- GT Spec Header/uppipe combo, fits WRX, STi or Legacy Turbo $175
-'99-01 2.5RS white face gauge cluster $75
-'96 Impreza Outback sport gauge cluster $50
-'00 2.5 RS 5 speed transmission, close ratio 4:11, $650
-'00 2.5 RS SOHC 2.5 L heads, a couple of bent valves, $250obo
-'00 2.5 RS fuel pump $25
-2.2 or 2.5 non turbo exhaust, cat back with performance muffler $175 **SOLD**
-JDM 2.5(EJ25) intake manifolds, w/harness, sensors, injectors $125 ea**1 left**
-'96 Impreza Outback sport wagon wiring harness $150
-'96 Impreza Outback sport wagon plastic trim, A/B/C pillar $120
-'96 Impreza Outback sport wagon carpet, grey $75. will also work in 2/4 doors.
-'93-01 Impreza wagon tail lights, no cracks $100 for the pair
-'93 Subaru Legacy Turbo white sedan doors (4) $125 ea, complete w/ door cards
-'93 Subaru Legacy Turbo rear deck lid with spoiler $175
-'93 Subaru Legacy Turbo rear bumper w/ beam, white $150
-'93 Legacy sedan Left tail light $40
-'93 Subaru Legacy Turbo seats $125pr
-'95-98 Subaru Legacy wagon rear hatch reflector $50
-'95-05 front and rear sway bars, L, RS, WRX, OBS models $25-50 ea
-Rear differentials- 3:90, 4:11, 4:44. R160 and R180 $150-500 **R180 SOLD**
-Manual Transmissions- 3:90, 4:11 AWD and FWD $350-750
-Buildable engine cores- 2.2, 2.5 SOHC and DOHC $150-350 including heads
-Suspension parts- control arms, lateral links, subframes..what did you bend in the snow??
Please post, pm or email me for more info or with any questions.
Thanks.
Last edited by Legacy294 on Thu May 07, 2009 5:30 pm, edited 2 times in total.
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.Pita84 wrote:have any good struts/springs that will slightly raise a legacy turbo
All PM's replied to. Thanks for all of the inquiries.
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
-
- Knowledgeable
- Posts: 3335
- Joined: Wed Feb 16, 2005 9:40 pm
- Location: Oregon
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
You got a 2.2t you dont' want for cheap?
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
-
- Knowledgeable
- Posts: 3335
- Joined: Wed Feb 16, 2005 9:40 pm
- Location: Oregon
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
I see. I need a complete motor. One I can just drop in my car and not have to round up parts to make it run. I just want my car to run.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
-
- Fifth Gear
- Posts: 3526
- Joined: Wed Jul 18, 2007 5:07 pm
- Location: Whammy!
-
- First Gear
- Posts: 175
- Joined: Wed Mar 25, 2009 7:24 pm
- Location: Trevor, Wisconsin
- Contact:
How much of a lift do either one give you? We are looking to get around 1-2" lift over stock. Just looking for a little extra ground clearance and to clear my rally tires (I have 205-55-16's that are more on the large side)... We mainly need struts. I have WRX wagon springs, just need some struts.Legacy294 wrote:How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.Pita84 wrote:have any good struts/springs that will slightly raise a legacy turbo
All PM's replied to. Thanks for all of the inquiries.
Barrett-
www.allwheelsdriven.net
Think I've got one around..I'll check and post up later.SubaruNation wrote:stock legacy turbo charge pipe? theelbow thing that runs from the throttle body to the turbo.
i need one
Thanks for the inquiry.
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
Are you looking for an R160 or R180 and what style axles will you be running?smh0101 wrote:What would you want for a 4.44 fd Rear Diff?
The early Legacy style (male outer/female inner) or later Impreza/Legacy (male on both ends) style?
Please get back to me when you can.
Thanks for the inquiry.
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
Usually at least 1-1.5" of lift. I have a set of low mileage (less than 2k on them) KYB GR2's for a WRX sedan in good condition. $160 + shipping.92 Rally wrote:How much of a lift do either one give you? We are looking to get around 1-2" lift over stock. Just looking for a little extra ground clearance and to clear my rally tires (I have 205-55-16's that are more on the large side)... We mainly need struts. I have WRX wagon springs, just need some struts.Legacy294 wrote:How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.Pita84 wrote:have any good struts/springs that will slightly raise a legacy turbo
All PM's replied to. Thanks for all of the inquiries.
Barrett-
www.allwheelsdriven.net
Also, you might think about Outback or Forester struts/springs. That would give you better clearance than with the WRX springs. I used to run Outback struts w/ Scorpion lift springs on my 1st Leggy rally car. That lifted the car about 2" over stock..
On your rally tire set up, something in the 195/65r15 range would work better on gravel and/or rally x than a 16. More side wall, skinner contact patch, more grip, and better impact resistance. Also, most gravel tires that you'll find for your car will be in the 15" range.
Thanks for the inquiry.
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
The TMIC comes with the y pipe and elbow (one piece) and no bpv. Usually I get $20 for the stock bpv, bit not sure if I have one around. Shoot me over your email, and I can send pics.jton wrote:Does the 02-05 WRX TMIC come with y-pipe, elbow, and bpv? Im very interested! And new on here I'd like to see pics as well. Thanks.
Thanks for the inquiry.
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
-
- First Gear
- Posts: 175
- Joined: Wed Mar 25, 2009 7:24 pm
- Location: Trevor, Wisconsin
- Contact:
Legacy294 wrote:Usually at least 1-1.5" of lift. I have a set of low mileage (less than 2k on them) KYB GR2's for a WRX sedan in good condition. $160 + shipping.92 Rally wrote:How much of a lift do either one give you? We are looking to get around 1-2" lift over stock. Just looking for a little extra ground clearance and to clear my rally tires (I have 205-55-16's that are more on the large side)... We mainly need struts. I have WRX wagon springs, just need some struts.Legacy294 wrote: How tall do you want to go? Have some Outback springs, and maybe Forester too.. Post or PM whatever you're after.
All PM's replied to. Thanks for all of the inquiries.
Barrett-
www.allwheelsdriven.net
Also, you might think about Outback or Forester struts/springs. That would give you better clearance than with the WRX springs. I used to run Outback struts w/ Scorpion lift springs on my 1st Leggy rally car. That lifted the car about 2" over stock..
On your rally tire set up, something in the 195/65r15 range would work better on gravel and/or rally x than a 16. More side wall, skinner contact patch, more grip, and better impact resistance. Also, most gravel tires that you'll find for your car will be in the 15" range.
Thanks for the inquiry.
Barrett-
www.allwheelsdriven.net
I already have the 16's thats why we want to use them. Dont feel like spending more money on wheels/tires when we already have a good set. I was using these on my WRX wagon for 2yrs with great success.
We want OBS or Forester struts/springs, they are just hard to find.
Any idea what WRX struts and springs will do to it? I can not really see it dropping any with that combination.... Not sure though.
Im looking for an r160 rear diff that will work with the Stock Legacy Turbo axles.... so the male outer/female inner.Legacy294 wrote:Are you looking for an R160 or R180 and what style axles will you be running?smh0101 wrote:What would you want for a 4.44 fd Rear Diff?
The early Legacy style (male outer/female inner) or later Impreza/Legacy (male on both ends) style?
Please get back to me when you can.
Thanks for the inquiry.
Barrett-
www.allwheelsdriven.net
~Spencer
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
Hunted around and found the charge pipe for you..SubaruNation wrote:stock legacy turbo charge pipe? theelbow thing that runs from the throttle body to the turbo.
i need one
List on them is over $200..
How about $40 shipped? 20% of new cost.
LMK and I can get it otw.
Thanks.
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
Yes,jton wrote:Hey Barrett, did you get my PM with my email? Still waiting on those pics!
Can't seem to upload pics with my new phone..
If you have a cell that get pic messages I can send them asap.
Pm if you do.. my other digicam isn't working.
Thanks,
Barrett-
www.allwheelsdriven.net
'96 GF/STi Rally wagon, under construction
If it's mechanical, it WILL break...
www.allwheelsdriven.net
If it's mechanical, it WILL break...
www.allwheelsdriven.net
Might be interested in the tmic. I cant remember if this will fit fairly easy on a 91 legacy ss. I will check around on here and am very interested.
Shawn
91 Legacy SS AT
93 Legacy L Wagon
To get your hands on superior lubricant products from AMSOIL utilize the following url:
http://www.amsoil.com/redirect.cgi?zo=1819626&page=store
91 Legacy SS AT
93 Legacy L Wagon
To get your hands on superior lubricant products from AMSOIL utilize the following url:
http://www.amsoil.com/redirect.cgi?zo=1819626&page=store
Forgot to add what would be the total shipped to 49660. And as i read above that it includes the y-pipe. Let me know and i will reply.
Shawn
91 Legacy SS AT
93 Legacy L Wagon
To get your hands on superior lubricant products from AMSOIL utilize the following url:
http://www.amsoil.com/redirect.cgi?zo=1819626&page=store
91 Legacy SS AT
93 Legacy L Wagon
To get your hands on superior lubricant products from AMSOIL utilize the following url:
http://www.amsoil.com/redirect.cgi?zo=1819626&page=store