Resonator

kimokalihi · Post by **kimokalihi** » Wed Oct 29, 2008 5:53 pm

I'm trying to get parts together for my exhaust. It's going to be 3" all the way from the turbo back. I've already got a 3" downpipe and I think I've located a Borla XSPRO muffler with a 3" inlet and now I need a resonator and maybe a high flow cat.

Where do I get a resonator from? The only ones that the exhaust companies seem to sell are in catback systems and I'm not buying a cat back system. Do they make them in 3"?

94SS_Canada · Post by **94SS_Canada** » Thu Oct 30, 2008 5:51 am

Probably hard to find in 3" however there are the tractor variety. just shop around it dosent have to be pretty just make shure it flows good.

Imprezive · Post by **Imprezive** » Thu Oct 30, 2008 6:00 am

Look for a flowmaster unit, or maybe a magnaflow one. high flow cats are expensive. screw the environment there are plenty of diesels and old muscle cars that are already screwing things up, just run it straight back.

Just make sure its quiet so the fuzz doens't catch wind and pull you over. Tickets for catless exhausts are expensive

kimokalihi · Post by **kimokalihi** » Thu Oct 30, 2008 9:52 am

Wonder if that guy I sold my 89 toyota pickup ever got caught with his catless exhaust. I took the stock cat off that was all plugged up and nasty and cut the mounting flanges off and welded them to a straight piece of pipe the same length and bolted it in place of the cat.

I'll check magnaflow for a resonator. Does it need to be 3" like the rest of the exhaust? I would assume it would.

Imprezive · Post by **Imprezive** » Thu Oct 30, 2008 3:12 pm

You could keep the 3" down pipe and go for a 2.5" the rest of the way. That will ultimately limit power if you plan to go big, but if not it will be more quiet and easier to find a resonator for. Not to mention it will fit better

kimokalihi · Post by **kimokalihi** » Thu Oct 30, 2008 3:37 pm

Yeah that's an option but I'd rather go 3" all the way because I'm sure in the future I'll want more power and the more if breathes the better.

Bdub · Post by **Bdub** » Tue Mar 03, 2009 11:16 pm

I know this is old, but I just put a resonator in.
I found a Moroso 94051 3" in and 3" out on amazon for around $50.
I honestly only noticed a minimal difference in tone. I should have just opted for a quieter muffler.

impreza_GC8 · Post by **impreza_GC8** » Tue Apr 14, 2009 6:35 am

I'm aware this is old as well but Vibrant makes good resonators as well.

555BCTurbo · Post by **555BCTurbo** » Tue Apr 14, 2009 8:29 pm

Dynomax Bullet...order from Summit

kimokalihi · Post by **kimokalihi** » Wed Apr 15, 2009 12:31 am

Thanks guys I had forgotten all about this thread. Funny thing is, I saw it and was thought,"hey I need a resonator, I'll check out that thread." Turns out, it was my thread! Haha.

I just ordered said Bullet resonator 3" inlet 3" outlet along with 3" borla muffler. Wasn't sure if I could need offset or center inlet on the muffler so I chose offset in hopes that it would allow for better options when installing.

Part # Item Price Qty Price

--------------------------------------------------------------------------------

BOR-40359 Muffler, Pro XS, 3 in. Offset Inlet/3 in. Center Outlet, Stainless Steel, Natural, Universal, Each $99.95 1 $99.95

WLK-24238 Muffler, Ultra Flow Welded, Race Bullet, 3.00 in. Inlet/3.00 in. Outlet, Stainless Steel, Each $47.95 1 $47.95

--------------------------------------------------------------------------------

Parts Total: $147.90
Delivery and Handling Charge: $11.95

Total Order: $159.85
Total amount charged at this time: $159.85

$160 for muffler and resonator. Not too bad. Shipped I might add.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Resonator

Resonator