Just got a boost gauge and am ready to install it. I
was just wondering where everyone's installed theirs?
I was thinking on the top left side of the dash, but I
don't want to permanently mar the surface of the dash.
Any suggestions? Or better yet, pictures?
Oh, and Dave, I've seen where you mounted yours on the
steering column. Very nice, but again, I'd like to do
something that doesn't leave anything permanent if
possible. I've also considered the DIN replacement,
or even making my own DIN panel for the gauge, but I'm
not sure what other gauges I'd get to fill the other
potential slots.
I'm also considering trying to get a Saab 900
intercooler in there but am worried about the cost of
getting the piping fabricated. Has anyone here added
a non-Subaru I/C with any luck? I'm trying to keep
the cost down otherwise I'd find a used Subaru piece.
I know that no matter which route I go I'll have to
have some piping fabricated. Any suggestions on where
I could turn to have the tube/piping fabricated?
TIA.
-Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
Boost Gauge install...
Moderators: Helpinators, Moderators
-
Simon LaRochelle
Boost Gauge install...
Here's what I did...looks good and realy easy to read when driving!!
Simon
----- Original Message -----
From: Brian <mailto:eastbaysubaru@yahoo.com> White
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 4:19 AM
Subject: [BC-BFLegacyWorks] Boost Gauge install...
Just got a boost gauge and am ready to install it. I
was just wondering where everyone's installed theirs?
I was thinking on the top left side of the dash, but I
don't want to permanently mar the surface of the dash.
Any suggestions? Or better yet, pictures?
Oh, and Dave, I've seen where you mounted yours on the
steering column. Very nice, but again, I'd like to do
something that doesn't leave anything permanent if
possible. I've also considered the DIN replacement,
or even making my own DIN panel for the gauge, but I'm
not sure what other gauges I'd get to fill the other
potential slots.
I'm also considering trying to get a Saab 900
intercooler in there but am worried about the cost of
getting the piping fabricated. Has anyone here added
a non-Subaru I/C with any luck? I'm trying to keep
the cost down otherwise I'd find a used Subaru piece.
I know that no matter which route I go I'll have to
have some piping fabricated. Any suggestions on where
I could turn to have the tube/piping fabricated?
TIA.
-Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
Height: 4 5 6 7 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
Simon
----- Original Message -----
From: Brian <mailto:eastbaysubaru@yahoo.com> White
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 4:19 AM
Subject: [BC-BFLegacyWorks] Boost Gauge install...
Just got a boost gauge and am ready to install it. I
was just wondering where everyone's installed theirs?
I was thinking on the top left side of the dash, but I
don't want to permanently mar the surface of the dash.
Any suggestions? Or better yet, pictures?
Oh, and Dave, I've seen where you mounted yours on the
steering column. Very nice, but again, I'd like to do
something that doesn't leave anything permanent if
possible. I've also considered the DIN replacement,
or even making my own DIN panel for the gauge, but I'm
not sure what other gauges I'd get to fill the other
potential slots.
I'm also considering trying to get a Saab 900
intercooler in there but am worried about the cost of
getting the piping fabricated. Has anyone here added
a non-Subaru I/C with any luck? I'm trying to keep
the cost down otherwise I'd find a used Subaru piece.
I know that no matter which route I go I'll have to
have some piping fabricated. Any suggestions on where
I could turn to have the tube/piping fabricated?
TIA.
-Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
Height: 4 5 6 7 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Josh Colombo
Boost Gauge install...
That does look good......I just wouldn't want to loose the vents.
I would think you could do something similar below the radio if you have replaced the factory unit with a single din style head unit.
Josh
-----Original Message-----
From: Simon LaRochelle [mailto:larosi@videotron.ca]
Sent: Fri 5/10/2002 10:15 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: Re: [BC-BFLegacyWorks] Boost Gauge install...
Here's what I did...looks good and realy easy to read when driving!!
Simon
----- Original Message -----
From: Brian <mailto:eastbaysubaru@yahoo.com> White
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 4:19 AM
Subject: [BC-BFLegacyWorks] Boost Gauge install...
Just got a boost gauge and am ready to install it. I
was just wondering where everyone's installed theirs?
I was thinking on the top left side of the dash, but I
don't want to permanently mar the surface of the dash.
Any suggestions? Or better yet, pictures?
Oh, and Dave, I've seen where you mounted yours on the
steering column. Very nice, but again, I'd like to do
something that doesn't leave anything permanent if
possible. I've also considered the DIN replacement,
or even making my own DIN panel for the gauge, but I'm
not sure what other gauges I'd get to fill the other
potential slots.
I'm also considering trying to get a Saab 900
intercooler in there but am worried about the cost of
getting the piping fabricated. Has anyone here added
a non-Subaru I/C with any luck? I'm trying to keep
the cost down otherwise I'd find a used Subaru piece.
I know that no matter which route I go I'll have to
have some piping fabricated. Any suggestions on where
I could turn to have the tube/piping fabricated?
TIA.
-Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
Height: 4 5 6 7 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
I would think you could do something similar below the radio if you have replaced the factory unit with a single din style head unit.
Josh
-----Original Message-----
From: Simon LaRochelle [mailto:larosi@videotron.ca]
Sent: Fri 5/10/2002 10:15 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: Re: [BC-BFLegacyWorks] Boost Gauge install...
Here's what I did...looks good and realy easy to read when driving!!
Simon
----- Original Message -----
From: Brian <mailto:eastbaysubaru@yahoo.com> White
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 4:19 AM
Subject: [BC-BFLegacyWorks] Boost Gauge install...
Just got a boost gauge and am ready to install it. I
was just wondering where everyone's installed theirs?
I was thinking on the top left side of the dash, but I
don't want to permanently mar the surface of the dash.
Any suggestions? Or better yet, pictures?
Oh, and Dave, I've seen where you mounted yours on the
steering column. Very nice, but again, I'd like to do
something that doesn't leave anything permanent if
possible. I've also considered the DIN replacement,
or even making my own DIN panel for the gauge, but I'm
not sure what other gauges I'd get to fill the other
potential slots.
I'm also considering trying to get a Saab 900
intercooler in there but am worried about the cost of
getting the piping fabricated. Has anyone here added
a non-Subaru I/C with any luck? I'm trying to keep
the cost down otherwise I'd find a used Subaru piece.
I know that no matter which route I go I'll have to
have some piping fabricated. Any suggestions on where
I could turn to have the tube/piping fabricated?
TIA.
-Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
Height: 4 5 6 7 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Simon LaRochelle
Boost Gauge install...
I did put it below the radio...realy anoing to have to look down there all the time...
You can put the vents back in place if you want to sell the car...and you won't miss it at all...plenty of air from the sides!!!!
----- Original Message -----
From: Josh <mailto:josh@surrealmirage.com> Colombo
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 11:52 AM
Subject: RE: [BC-BFLegacyWorks] Boost Gauge install...
That does look good......I just wouldn't want to loose the vents.
I would think you could do something similar below the radio if you have replaced the factory unit with a single din style head unit.
Josh
-----Original Message-----
From: Simon LaRochelle [mailto:larosi@videotron.ca]
Sent: Fri 5/10/2002 10:15 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: Re: [BC-BFLegacyWorks] Boost Gauge install...
Here's what I did...looks good and realy easy to read when driving!!
Simon
----- Original Message -----
From: Brian White <mailto:eastbaysubaru@yahoo.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 4:19 AM
Subject: [BC-BFLegacyWorks] Boost Gauge install...
Just got a boost gauge and am ready to install it. I
was just wondering where everyone's installed theirs?
I was thinking on the top left side of the dash, but I
don't want to permanently mar the surface of the dash.
Any suggestions? Or better yet, pictures?
Oh, and Dave, I've seen where you mounted yours on the
steering column. Very nice, but again, I'd like to do
something that doesn't leave anything permanent if
possible. I've also considered the DIN replacement,
or even making my own DIN panel for the gauge, but I'm
not sure what other gauges I'd get to fill the other
potential slots.
I'm also considering trying to get a Saab 900
intercooler in there but am worried about the cost of
getting the piping fabricated. Has anyone here added
a non-Subaru I/C with any luck? I'm trying to keep
the cost down otherwise I'd find a used Subaru piece.
I know that no matter which route I go I'll have to
have some piping fabricated. Any suggestions on where
I could turn to have the tube/piping fabricated?
TIA.
-Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225> Height: 4567 ft 01234567891011 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
Height: 4 5 6 7 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =625531549>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
You can put the vents back in place if you want to sell the car...and you won't miss it at all...plenty of air from the sides!!!!
----- Original Message -----
From: Josh <mailto:josh@surrealmirage.com> Colombo
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 11:52 AM
Subject: RE: [BC-BFLegacyWorks] Boost Gauge install...
That does look good......I just wouldn't want to loose the vents.
I would think you could do something similar below the radio if you have replaced the factory unit with a single din style head unit.
Josh
-----Original Message-----
From: Simon LaRochelle [mailto:larosi@videotron.ca]
Sent: Fri 5/10/2002 10:15 AM
To: BC-BFLegacyWorks@yahoogroups.com
Cc:
Subject: Re: [BC-BFLegacyWorks] Boost Gauge install...
Here's what I did...looks good and realy easy to read when driving!!
Simon
----- Original Message -----
From: Brian White <mailto:eastbaysubaru@yahoo.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Friday, May 10, 2002 4:19 AM
Subject: [BC-BFLegacyWorks] Boost Gauge install...
Just got a boost gauge and am ready to install it. I
was just wondering where everyone's installed theirs?
I was thinking on the top left side of the dash, but I
don't want to permanently mar the surface of the dash.
Any suggestions? Or better yet, pictures?
Oh, and Dave, I've seen where you mounted yours on the
steering column. Very nice, but again, I'd like to do
something that doesn't leave anything permanent if
possible. I've also considered the DIN replacement,
or even making my own DIN panel for the gauge, but I'm
not sure what other gauges I'd get to fill the other
potential slots.
I'm also considering trying to get a Saab 900
intercooler in there but am worried about the cost of
getting the piping fabricated. Has anyone here added
a non-Subaru I/C with any luck? I'm trying to keep
the cost down otherwise I'd find a used Subaru piece.
I know that no matter which route I go I'll have to
have some piping fabricated. Any suggestions on where
I could turn to have the tube/piping fabricated?
TIA.
-Brian
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225> Height: 4567 ft 01234567891011 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
Height: 4 5 6 7 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
Weight:
Sex: F M
<http://us.adserver.yahoo.com/l?M=194081 ... =625531549>
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
-
Brian White
Boost Gauge install...
I have long since replaced the stock head unit. I
just thought that seemed a little low for the
gauge(s). It seems like it'd be difficult to read
that low. I'm not a huge fan of A-pillar pods, but
could consider one. Has anyone here attempted to use
the impreza one on our cars? It looks like it might
fit. They sell a single gauge pod which wouldn't be
too ostentatious. Any thoughts?
-Brian
--- Josh Colombo <josh@surrealmirage.com> wrote:
> That does look good......I just wouldn't want to
> loose the vents.
>
> I would think you could do something similar below
> the radio if you have replaced the factory unit with
> a single din style head unit.
>
> Josh
>
> -----Original Message-----
> From: Simon LaRochelle [mailto:larosi@videotron.ca]
>
> Sent: Fri 5/10/2002 10:15 AM
> To: BC-BFLegacyWorks@yahoogroups.com
> Cc:
> Subject: Re: [BC-BFLegacyWorks] Boost Gauge
> install...
>
>
> Here's what I did...looks good and realy easy to
> read when driving!!
>
> Simon
>
> ----- Original Message -----
> From: Brian White <mailto:eastbaysubaru@yahoo.com>
>
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Friday, May 10, 2002 4:19 AM
> Subject: [BC-BFLegacyWorks] Boost Gauge install...
>
> Just got a boost gauge and am ready to install it.
> I
> was just wondering where everyone's installed
> theirs?
> I was thinking on the top left side of the dash,
> but I
> don't want to permanently mar the surface of the
> dash.
> Any suggestions? Or better yet, pictures?
>
> Oh, and Dave, I've seen where you mounted yours on
> the
> steering column. Very nice, but again, I'd like
> to do
> something that doesn't leave anything permanent if
> possible. I've also considered the DIN
> replacement,
> or even making my own DIN panel for the gauge, but
> I'm
> not sure what other gauges I'd get to fill the
> other
> potential slots.
>
> I'm also considering trying to get a Saab 900
> intercooler in there but am worried about the cost
> of
> getting the piping fabricated. Has anyone here
> added
> a non-Subaru I/C with any luck? I'm trying to
> keep
> the cost down otherwise I'd find a used Subaru
> piece.
> I know that no matter which route I go I'll have
> to
> have some piping fabricated. Any suggestions on
> where
> I could turn to have the tube/piping fabricated?
>
> TIA.
>
> -Brian
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Mother's Day is May 12th!
> http://shopping.yahoo.com
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service <http://docs.yahoo.com/info/terms/>
> .
>
>
>
>
>
> ADVERTISEMENT
>
>
>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
>
>
>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
> Height: 4567 ft 01234567891011 in
> Weight:
> Sex: F M
>
>
>
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service <http://docs.yahoo.com/info/terms/>
> .
>
>
>
> ------------------------
>
> To unsubscribe from this group, please send an email
> to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> ATTACHMENT part 2 application/ms-tnef
name=winmail.dat
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
just thought that seemed a little low for the
gauge(s). It seems like it'd be difficult to read
that low. I'm not a huge fan of A-pillar pods, but
could consider one. Has anyone here attempted to use
the impreza one on our cars? It looks like it might
fit. They sell a single gauge pod which wouldn't be
too ostentatious. Any thoughts?
-Brian
--- Josh Colombo <josh@surrealmirage.com> wrote:
> That does look good......I just wouldn't want to
> loose the vents.
>
> I would think you could do something similar below
> the radio if you have replaced the factory unit with
> a single din style head unit.
>
> Josh
>
> -----Original Message-----
> From: Simon LaRochelle [mailto:larosi@videotron.ca]
>
> Sent: Fri 5/10/2002 10:15 AM
> To: BC-BFLegacyWorks@yahoogroups.com
> Cc:
> Subject: Re: [BC-BFLegacyWorks] Boost Gauge
> install...
>
>
> Here's what I did...looks good and realy easy to
> read when driving!!
>
> Simon
>
> ----- Original Message -----
> From: Brian White <mailto:eastbaysubaru@yahoo.com>
>
> To: BC-BFLegacyWorks@yahoogroups.com
> Sent: Friday, May 10, 2002 4:19 AM
> Subject: [BC-BFLegacyWorks] Boost Gauge install...
>
> Just got a boost gauge and am ready to install it.
> I
> was just wondering where everyone's installed
> theirs?
> I was thinking on the top left side of the dash,
> but I
> don't want to permanently mar the surface of the
> dash.
> Any suggestions? Or better yet, pictures?
>
> Oh, and Dave, I've seen where you mounted yours on
> the
> steering column. Very nice, but again, I'd like
> to do
> something that doesn't leave anything permanent if
> possible. I've also considered the DIN
> replacement,
> or even making my own DIN panel for the gauge, but
> I'm
> not sure what other gauges I'd get to fill the
> other
> potential slots.
>
> I'm also considering trying to get a Saab 900
> intercooler in there but am worried about the cost
> of
> getting the piping fabricated. Has anyone here
> added
> a non-Subaru I/C with any luck? I'm trying to
> keep
> the cost down otherwise I'd find a used Subaru
> piece.
> I know that no matter which route I go I'll have
> to
> have some piping fabricated. Any suggestions on
> where
> I could turn to have the tube/piping fabricated?
>
> TIA.
>
> -Brian
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Mother's Day is May 12th!
> http://shopping.yahoo.com
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service <http://docs.yahoo.com/info/terms/>
> .
>
>
>
>
>
> ADVERTISEMENT
>
>
>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
>
>
>
<http://rd.yahoo.com/M=194081.2053425.35 ... ?code=3225>
> Height: 4567 ft 01234567891011 in
> Weight:
> Sex: F M
>
>
>
<http://us.adserver.yahoo.com/l?M=194081 ... =844473704>
>
>
> To unsubscribe from this group, please send an
> email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service <http://docs.yahoo.com/info/terms/>
> .
>
>
>
> ------------------------
>
> To unsubscribe from this group, please send an email
> to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> ATTACHMENT part 2 application/ms-tnef
name=winmail.dat
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!
http://shopping.yahoo.com
------------------------ ---------------------~-->
Buy Stock for $4
and no minimums.
FREE Money 2002.
http://us.click.yahoo.com/orkH0C/n97DAA ... /XoTolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com