3" exhaust gaskets

magicmike · Post by **magicmike** » Thu Jun 11, 2009 5:33 pm

I have taken my CES exhaust off and on a few times and I just noticed last night that my exhaust flange gasket was missing a chunk at the "test" pipe. I hit up the local parts shops and they can only order stuff by make and model of the car. Does anyone have a site they could reccomend for these things? I've emailed CES and am waiting for a response from them.

Thanks,

Mike

Post by **Legacy777** » Thu Jun 11, 2009 5:53 pm

Here's a couple

http://www.frsport.com/FRSport-3-Inch-- ... _1305.html

http://www.rallysportdirect.com/shop/ge ... p-694.html

http://www.fastwrx.com/3in2hoexga.html

SLODRIVE · Post by **SLODRIVE** » Thu Jun 11, 2009 5:56 pm

Most NAPA and Carquest stores, among others, have gasket "picture guides" with life-size illustrations of all of their exhaust flange gaskets. Their exhaust catalogs also have size listings for the gaskets too. Hopefully there's more than one parts store near you, since the one you mentioned sounds less than helpful. Just adding another option...

Post by **Legacy777** » Thu Jun 11, 2009 5:59 pm

Yeah....napa & carquest tend to be staffed by people that know a little more than.....oh I don't know.....what year and model...the computer has to tell me.

magicmike · Post by **magicmike** » Thu Jun 11, 2009 6:24 pm

wow, I can't believe you guys found that so quick. I spent quite some time on google searching for this and got pissed and decided to ask on here. Thanks alot guys!

Post by **Legacy777** » Thu Jun 11, 2009 9:38 pm

I just typed in 3" exhaust gasket and most of that stuff was in the first couple links

Skruyd · Post by **Skruyd** » Thu Jun 11, 2009 10:45 pm

If you can't find one local you can always take some cardboard and cut it to shape. As long as you tighten it up tight where it won't leak the cardboard won't burn. If the exhaust leaks then the cardboard will be toast.

magicmike · Post by **magicmike** » Thu Jun 11, 2009 10:55 pm

Legacy777 wrote:I just typed in 3" exhaust gasket and most of that stuff was in the first couple links

Thats strange. I definately tooled around for a while to no avail. At any rate I was able to find something close at some place locally called "pipe dreams" and trim it to fit.

Thanks again.

Dynamic Entry · Post by **Dynamic Entry** » Sat Aug 15, 2009 3:57 pm

I thought I posted this before but it was a busy time and I may just remember intending to....

I found a gasket from NAPA that fits (with very minor trimming of the tabs)

Part # 521843-001
Barcode # 0 62573 22442 9

going to buy some again right now...

Post by **Legacy777** » Tue Nov 17, 2009 7:56 pm

Mike,

Did you end up getting any of the gaskets above, or did you the ones Andrew got from NAPA?

Mattheww044 · Post by **Mattheww044** » Tue Nov 17, 2009 8:14 pm

I just ended up buying the Grimmspeed 12 layer gasket, a bit spendy. But I wanted something I know wouldn't leak between myt DP and MP

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

3" exhaust gaskets

3" exhaust gaskets