WTB: Sway bars and other suspension bits

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
Apex3
Fourth Gear
Posts: 1165
Joined: Tue Jan 06, 2009 5:06 am
Location: Renton, WA

WTB: Sway bars and other suspension bits

Post by Apex3 »

Specifically a Whiteline rear, and WRX wagon front, let me know what you got!

If you have anything else I may be interested as well, I already have STi springs/struts and not looking to upgrade that ATM. But something like a solid front strut bar, and rear if they do anything for these cars, fender braces, bushings, whatever else. Not looking to spend a whole lot though.
Top
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

I think the whiteline bar is going to be hard to find. But you can get one for about $220 shipped from never enough auto accessories website.

http://neverenoughauto.com/index.php?ta ... t_id=10936

Par number BSR17XZ.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Top
Apex3
Fourth Gear
Posts: 1165
Joined: Tue Jan 06, 2009 5:06 am
Location: Renton, WA

Post by Apex3 »

Oh nice, thanks, I didn't think I'd find one used, but I thought I'd ask while I asked about the wagon bar.
Top
Apex3
Fourth Gear
Posts: 1165
Joined: Tue Jan 06, 2009 5:06 am
Location: Renton, WA

Post by Apex3 »

Got a front sway bar and fender braces coming, leaves me just enough for a rear sway bar. where can you get an adjustable rear bar? I'd prefer 22mm if I can.

Also what hardware do I need for the 20mm WRX wagon bar? I'm getting the hardware with it, but I'm not sure if that will work or if I need something else. I assume with the whiteline it will be a kit.

EDIT: found the 22 on the site, sweet deal, cheaper too. How come there are two different 22mm adjustable bars for different prices? They all say they fit an 89-94 turbo...
http://neverenoughauto.com/index.php?ta ... y_id=22356
Top
Post Reply

Return to “Parts Shed”