Oil Squirter Pressure.

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
scuzzy
Third Gear
Posts: 775
Joined: Sun Feb 20, 2005 1:53 am

Oil Squirter Pressure.

Post by scuzzy »

FYI, one of mine was in the pan when I dropped the engine in about four years ago.

I found it in a box when digging through stuff tonight and decided to pressure test it. It opens at 60PSI.

I assume all others are the same.
91 Legacy Wagon, Total Rally Car.

#82 M4 TRSCCA Rallycross

http://www.youtube.com/mobilepolice/
Top
93forestpearl
Fifth Gear
Posts: 3043
Joined: Tue Jan 25, 2005 9:14 pm
Location: Twin Cities, MN

Post by 93forestpearl »

That sounds about right. Mine open at about 52-53 psi, but that is gauge pressure, sourced from the turbo feed.
→Dan

piddster34 at h0tma1l d0t c0m
Top
scuzzy
Third Gear
Posts: 775
Joined: Sun Feb 20, 2005 1:53 am

Post by scuzzy »

yeah this was gauge pressure but it was off my industrial air drier thing on my compressor.
91 Legacy Wagon, Total Rally Car.

#82 M4 TRSCCA Rallycross

http://www.youtube.com/mobilepolice/
Top
Post Reply

Return to “Engine”