Oil in the IAC valve.......What!?!?!

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
Rhinoculips
In Neutral
Posts: 22
Joined: Sun May 24, 2009 4:02 am

Oil in the IAC valve.......What!?!?!

Post by Rhinoculips »

I have been dealing with an ever worsening idle problem that I narrowed down to the IAC.

So I pulled it off to replace it and found a pool of oil on the intake manifold side of where the IAC mounts. This, I assume, is not normal. Where did this come from and what do I do to fix it?

My guess is the PCV valve needs replacing. What do you think?
fishbone79
Second Gear
Posts: 502
Joined: Fri Sep 03, 2004 3:14 am
Location: Armpit, USA

Post by fishbone79 »

Do your PCV and maybe don't drive quite so hard ;)

...although, there are other explanations.
Cheers,
morgan

1992 Legacy BF
1946 Ford 1.5 Ton Truck (The Beast): http://community.webshots.com/user/fishbone79
Legacy777
Site Admin
Site Admin
Posts: 27928
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

Unfortunately, I'd say what you found is relatively common. There's going to be oil in your intake manifold. from the PCV system. Plus the PCV valve is right above the IAC valve.

You can help minimize it with making sure the PCV valve is new, and maybe a catch can. The oil dripping down could have caused the valve to become sticky or similar.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply