Anyone if this will bolt into a '92 sedan? Would I need wrx rear axles
also?
Sure would be nice to have a limited slipp in the rear.
Thanks
-T
2002 wrx rear diff
Moderators: Helpinators, Moderators
-
Josh Colombo
2002 wrx rear diff
Is the 92 a turbo or N/A. I'm assuming it's a n/a car.......as long as the final drive ratio is the same it "should" bolt up.
-
Todd Munson
2002 wrx rear diff
Its a turbo. Does that make a difference beyond , diff ratio? I guess
the ratio definitely needs to be the same to stay in sync with the
front diff. We have a 3.9 in the rear for turbo sedans, correct?
-T
the ratio definitely needs to be the same to stay in sync with the
front diff. We have a 3.9 in the rear for turbo sedans, correct?
-T
-
Josh Colombo
2002 wrx rear diff
Yeah I'm pretty sure you have a 3.9 final drive ratio. You can look on the diff and it should tell you. I had thought the turbo legacy dif's were LSD........
The WRX has 4.111 final drive ratio
The WRX has 4.111 final drive ratio
-
Andrew Mouser
2002 wrx rear diff
Josh,
On the LSD for the turbo's, you're correct. The
Legacies have a limited slip differential, at least
for the U.S. spec. Unsure about the other country's
specs.
Andrew
On the LSD for the turbo's, you're correct. The
Legacies have a limited slip differential, at least
for the U.S. spec. Unsure about the other country's
specs.
Andrew
-
braschlosan
2002 wrx rear diff
The older legacy uses pin attached rear axles while the newer model
subaru use slide on style. If this would bolt up you would definatly
need either the WRX axels or another slide on type.
Anyone have an idea why I have not received any emails from this list
yet? I signed up hours ago and I have the individual email option
checked and I still have only received the initial welcome message.
subaru use slide on style. If this would bolt up you would definatly
need either the WRX axels or another slide on type.
Anyone have an idea why I have not received any emails from this list
yet? I signed up hours ago and I have the individual email option
checked and I still have only received the initial welcome message.
-
Josh Colombo
2002 wrx rear diff
Lemme take a look at your settings, and see if they are ok......if they
are.....just give it a little time.
I'll let ya know if there is a problem
Josh
are.....just give it a little time.
I'll let ya know if there is a problem
Josh
-
Josh Colombo
2002 wrx rear diff
I don't see you listed in the members anywhere.....you're not in the
bouncing section.
Give it till tomorrow.....if you're still having problems.......try
recreating the account....or shoot me an email.
Josh Colombo
bouncing section.
Give it till tomorrow.....if you're still having problems.......try
recreating the account....or shoot me an email.
Josh Colombo
-
milehial2000
2002 wrx rear diff
We have come to call the older style diffs outy's and the newer style
inny's refering to the axel needed for the diff. The the '02 WRX we
have that is salvage has the inny type (special axels)and is a 3:54
to 1 ratio but this was an automatic.
AL(CO)
inny's refering to the axel needed for the diff. The the '02 WRX we
have that is salvage has the inny type (special axels)and is a 3:54
to 1 ratio but this was an automatic.
AL(CO)