hi guy i just got my cam bolt kit
these support adjustment range from -1 to +1 Deg
i got only thre front bolt and just one bolt lol yeah you heard it
1 bolt anyway before ordering the rest of the part i would like to know what you rhink about these, right now i feel a lot of body roll while cornering and i would lke to know if these bolt are right for 14$ each its something ii really like to have opinion on.
these are from MOOG
any tought?
moog cam bolt kit adjustment range from -1 to +1 Deg
Moderators: Helpinators, Moderators
Do you have a link you could post to the part in question?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
These are just camber bolts. All they do is help you get some more camber. They are not going to help body roll. You shouldn't need them in the front, and you may not even need them in the rear. The rear suspension tends to already have a decent amount of camber, around -1 deg or more.
I would recommend upgrading your rear anti-sway bar if you're experiencing a lot of body roll.
I would recommend upgrading your rear anti-sway bar if you're experiencing a lot of body roll.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
I probably wouldn't recommend anything bigger than a 20mm for daily driver. I've got one of the WL adjustable bars, and have it set at 20mm.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
I, on the other hand, recommend big swaybars and lots of camber.
Currently on 22mm front and rear adjustable whiteline bars, and if they came bigger I would prefer 24mm bars.
I also have -2.5 degrees of camber in the front and -1.1 in the rear. The alignment is spot on for my usage and setup, since my front tire wear is dead even across the tread.
Currently on 22mm front and rear adjustable whiteline bars, and if they came bigger I would prefer 24mm bars.
I also have -2.5 degrees of camber in the front and -1.1 in the rear. The alignment is spot on for my usage and setup, since my front tire wear is dead even across the tread.
Yup....like Jamal indicated, there's different options, depending on how you drive and what you like...
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm