(MA) 480 cc w/ fuel rails / TD04 7k miles on rebuild
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
-
- In Neutral
- Posts: 36
- Joined: Thu Jan 01, 2009 7:03 pm
(MA) 480 cc w/ fuel rails / TD04 7k miles on rebuild
Well,
I just upgraded my ej22t to 550's & a td06-20 so I no longer need these,I actually only bought them to break-in the motor,That being done I want to get rid of this setup before if starts to collect dust,These injectors are strait from japan ,check the invoice, the turbo I got used ,didnt trust what I was being told so I rebuilt it ,I didnt need any suprises.
The injectors worked out mint,as well did the turbo.The fuel rails were the original ej22t 370's I'm not quite sure of cross fitment as what else they will fit ,so do your research,But all items came from a ej22t / 1991
Turbo : 120.00
Injectors & rails : SOLD
All offers considered , Dont waste my time if your pocket is empty
http://img197.imageshack.us/img197/6140/img0115ic.jpg Turbo link
http://img101.imageshack.us/img101/2668/img0130y.jpg Invoice link
http://img199.imageshack.us/img199/5852/dcp02055.jpg Pre Install Link turbo & injectors
http://img80.imageshack.us/img80/6620/img0125m.jpg Injector link
If you need more info LMK Via Pm
Jay
I just upgraded my ej22t to 550's & a td06-20 so I no longer need these,I actually only bought them to break-in the motor,That being done I want to get rid of this setup before if starts to collect dust,These injectors are strait from japan ,check the invoice, the turbo I got used ,didnt trust what I was being told so I rebuilt it ,I didnt need any suprises.
The injectors worked out mint,as well did the turbo.The fuel rails were the original ej22t 370's I'm not quite sure of cross fitment as what else they will fit ,so do your research,But all items came from a ej22t / 1991
Turbo : 120.00
Injectors & rails : SOLD
All offers considered , Dont waste my time if your pocket is empty
http://img197.imageshack.us/img197/6140/img0115ic.jpg Turbo link
http://img101.imageshack.us/img101/2668/img0130y.jpg Invoice link
http://img199.imageshack.us/img199/5852/dcp02055.jpg Pre Install Link turbo & injectors
http://img80.imageshack.us/img80/6620/img0125m.jpg Injector link
If you need more info LMK Via Pm
Jay
Last edited by jaybirde508 on Thu Jan 07, 2010 1:29 am, edited 3 times in total.
-
- Fourth Gear
- Posts: 2045
- Joined: Tue Nov 28, 2006 8:17 am
- Location: Spokane, WA
-
- In Neutral
- Posts: 36
- Joined: Tue Nov 18, 2008 11:34 pm
- Location: Louisville, CO
-
- In Neutral
- Posts: 45
- Joined: Fri Oct 30, 2009 5:06 pm
- Location: Minnesota City, MN 55959
Injectors and turbo...
are these still up for sale? if so and the turbo has no shaft endplay... I am certainly interested. Please write back... G.
-
- In Neutral
- Posts: 36
- Joined: Thu Jan 01, 2009 7:03 pm
Yes,
they are, the turbo is got the same milage as motor,I rebuilt the turbo when I got it as the guy I got it from was a bit shady,So I didnt want any supises,It turned out fine ,But what the hell for 70.00 a peice of mind is better
The injectors are new ,not reman like the ones on egay they are from the same company,but again I didnt want any issues I have too much $$ invested into the motor & tring to figure things out on start up is hard enof I didnt need schetchy fuel supply
Lmk I can put up more pic's ,But the items are what they are,the injectors are with the rails for ease of instalation the rails are the 370cc ones with new orings, done like the write up by N2X4
Jay
they are, the turbo is got the same milage as motor,I rebuilt the turbo when I got it as the guy I got it from was a bit shady,So I didnt want any supises,It turned out fine ,But what the hell for 70.00 a peice of mind is better
The injectors are new ,not reman like the ones on egay they are from the same company,but again I didnt want any issues I have too much $$ invested into the motor & tring to figure things out on start up is hard enof I didnt need schetchy fuel supply
Lmk I can put up more pic's ,But the items are what they are,the injectors are with the rails for ease of instalation the rails are the 370cc ones with new orings, done like the write up by N2X4
Jay
-
- Fourth Gear
- Posts: 2045
- Joined: Tue Nov 28, 2006 8:17 am
- Location: Spokane, WA
-
- In Neutral
- Posts: 45
- Joined: Fri Oct 30, 2009 5:06 pm
- Location: Minnesota City, MN 55959
-
- In Neutral
- Posts: 45
- Joined: Fri Oct 30, 2009 5:06 pm
- Location: Minnesota City, MN 55959
turbo...
would you take $100 shipped for the turbo right now? Paypal?
-
- Fourth Gear
- Posts: 2045
- Joined: Tue Nov 28, 2006 8:17 am
- Location: Spokane, WA
-
- In Neutral
- Posts: 45
- Joined: Fri Oct 30, 2009 5:06 pm
- Location: Minnesota City, MN 55959