Front Dif question

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Front Dif question

Post by lucas »

does anyone know some of the symptoms of a failing front diff. I think mines going out but im not sure its hard to tell. Acts like a busted axle round corners but with more vibrations. But it cant be cause at idle if you rev the motor you get the same nasty vibration.
1993 legacy ss "Shela"
Lunatech
Second Gear
Posts: 342
Joined: Sat Aug 07, 2004 9:29 am
Location: Jackson County OR
Contact:

Post by Lunatech »

I think it is more than likely the center diff causing it to bind and tweaking the engine/trans causing the exhaust to tweak and open at some point. This is what happened to me and it eventually stripped the splines off my passenger side front axle and broke my mounts before I figured out what it was. After the mounts broke it would get bound and stay bound also made it hard to shift, idle rough and run hot sometimes. IDK why maybe pinching coolant hoses. If I were to put it in revers and lunge it with the wheels cranked one way or the other it would unbind and drive normal till I turned too sharp again.

FWIW: this is only applicable if you're talking about an AWD vehicle :wink:
Robert,

Rio Red 1990 L sedan 5MT at least 302000 mi. and Spruce Pearl 1996 Wagon 4EAT 245000 mi.

georryan wrote:
Don't knock him for thinking outside of the box. At least he has been creative.
Legacy777
Site Admin
Site Admin
Posts: 27931
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

AT or MT?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Post by lucas »

its a legacy ss 5mt, and i just put new motor mounts and tranny mount on. Any ideas?
1993 legacy ss "Shela"
Legacy777
Site Admin
Site Admin
Posts: 27931
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

I would suspect the center diff as well.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Post by lucas »

balls, anyone gotta spare tranny they wanna trade.
1993 legacy ss "Shela"
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Post by lucas »

i guess my next question would be will a N/A 5mt work in place of a turbo 5mt
1993 legacy ss "Shela"
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Post by mike-tracy »

Sure it will, you'll have to use a rear diff that matches the new tranny.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Post by lucas »

how come the old dif wont work?
1993 legacy ss "Shela"
fishbone79
Second Gear
Posts: 502
Joined: Fri Sep 03, 2004 3:14 am
Location: Armpit, USA

Post by fishbone79 »

turbo is 3.90, NA is 4.11
Cheers,
morgan

1992 Legacy BF
1946 Ford 1.5 Ton Truck (The Beast): http://community.webshots.com/user/fishbone79
lucas
Third Gear
Posts: 736
Joined: Tue Nov 27, 2007 2:43 am
Location: tacoma washington

Post by lucas »

would 4.11 gearing be better?
1993 legacy ss "Shela"
Post Reply