1992 Legacy S EJ22T

Show us your Legacy pictures and videos.

Moderator: Moderators

Post Reply
TheUhrinator
In Neutral
Posts: 25
Joined: Wed Jan 27, 2010 4:30 am
Location: Spokane, WA

1992 Legacy S EJ22T

Post by TheUhrinator »

Well, Here she is, even though she isn't running, yet:
Image
Image
Image
Image

Well, the right rear wheel won't move so, any suggestions? http://bbs.legacycentral.org/viewtopic. ... 846#319846
And after that gets fixed, what else should I do to this car? It is a project car for me and my dad.
2000 Subaru Forester S
1992 Subaru Legacy S
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

Remove the wheel and the brake caliper and see if you can turn the axle using a pry bar between the lugs. That should tell you if it was a seized caliper or wheel bearings.

Actually you'll probably know if it's a seized caliper when you can't get the caliper off lol.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Post by Mattheww044 »

Welcome to the BBS!! Where about in Spokane do you live? I live kinda by Northtown, and I am driving a Red 91 SS, the build thread is in my sig if you wanna see some pics. It looks stock because all of my money is dumped under the hood or in the interior for now. I have a nice set of wheels, but still need tires. Don't be afraid to wave if you see me!

What all is wrong with the car, or are you still working on figuring that out?
1991 Subaru Legacy SS 5MT: Revtronix Stage 2 Set-up with a few other "tasteful" mods :D
TheUhrinator
In Neutral
Posts: 25
Joined: Wed Jan 27, 2010 4:30 am
Location: Spokane, WA

Post by TheUhrinator »

kimokalihi wrote:Remove the wheel and the brake caliper and see if you can turn the axle using a pry bar between the lugs. That should tell you if it was a seized caliper or wheel bearings.

Actually you'll probably know if it's a seized caliper when you can't get the caliper off lol.
Well, I took the caliper off and didn't think of using a pry bar on it. I'll try that tomorrow.
Mattheww044 wrote:Where about in Spokane do you live?
I live on 5 mile.
2000 Subaru Forester S
1992 Subaru Legacy S
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Post by Mattheww044 »

Nice, what are your plans for the car?
1991 Subaru Legacy SS 5MT: Revtronix Stage 2 Set-up with a few other "tasteful" mods :D
TheUhrinator
In Neutral
Posts: 25
Joined: Wed Jan 27, 2010 4:30 am
Location: Spokane, WA

Post by TheUhrinator »

Mattheww044 wrote:Nice, what are your plans for the car?
Well, Get it running... Then rebuild the engine and transmission. I will probably get a new turbo, intercooler and ECU. Probably will do a little more to the engine once I figure out what there is to do to it.
2000 Subaru Forester S
1992 Subaru Legacy S
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Post by Mattheww044 »

Is this the one off craigslist that was like $600, with a blown head gasket?
1991 Subaru Legacy SS 5MT: Revtronix Stage 2 Set-up with a few other "tasteful" mods :D
keelhaul
First Gear
Posts: 84
Joined: Fri Jan 08, 2010 2:19 am
Location: Southern Norway

Post by keelhaul »

OFF TOPIC

damn i wish i was in the states with all the (turbo)legacies! your prices are amazing, and looks like its very easy to get a hold on one in good shape.

on the web here in norway, all i can find is a rusty old turbo 91 for about 6 595,44 USD (40.000 NOK).
gijonas
Fourth Gear
Posts: 1010
Joined: Sat Nov 08, 2008 10:57 pm
Location: Damariscotta, Maine

Post by gijonas »

6 595,44 USD ....damn thats pricey :roll:
94SS.Wiseco forged pistons,TD04,TMIC,WALBRO 225,440's,3" all the way,revtronix stage 2,enough other crap to fill the internet.

THE TRIBUTE BUILD>>>LINKY LINK>>> http://bbs.legacycentral.org/viewtopic.php?p=295455#295455
TheUhrinator
In Neutral
Posts: 25
Joined: Wed Jan 27, 2010 4:30 am
Location: Spokane, WA

Post by TheUhrinator »

Mattheww044 wrote:Is this the one off craigslist that was like $600, with a blown head gasket?
Yeah, I got it for $450... :-D
keelhaul wrote:OFF TOPIC

damn i wish i was in the states with all the (turbo)legacies! your prices are amazing, and looks like its very easy to get a hold on one in good shape.

on the web here in norway, all i can find is a rusty old turbo 91 for about 6 595,44 USD (40.000 NOK)
Yeah, damn...
2000 Subaru Forester S
1992 Subaru Legacy S
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Post by mike-tracy »

gijonas wrote:6 595,44 USD ....damn thats pricey :roll:
Haha, commas = periods in many non-english speaking countries.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Post by Mattheww044 »

that still seems like alot of money haha
1991 Subaru Legacy SS 5MT: Revtronix Stage 2 Set-up with a few other "tasteful" mods :D
TheUhrinator
In Neutral
Posts: 25
Joined: Wed Jan 27, 2010 4:30 am
Location: Spokane, WA

Re: 1992 Legacy S EJ22T

Post by TheUhrinator »

Yeah, it looks better now, I've replaced both door handles now, so it looks better. I also completely cleaned out the interior. I'll post pictures tomorrow.
2000 Subaru Forester S
1992 Subaru Legacy S
Redlined
Fourth Gear
Posts: 1070
Joined: Tue Apr 12, 2005 7:00 am
Location: Portland, OR

Re: 1992 Legacy S EJ22T

Post by Redlined »

Sexy sexy sexy! Takes me back to the day I bought Angel.

1) read Legacycentral.... LOTS of Good people with skills, knowledge and experience here!

2) safety and reliability. Make sure your tires/breaks/suspension are all in good worling order. refresh all the engine fluids. Id de-yellow your headlights (quick, easy, cheap)

3) cosmetics. Make her look like the car you want her to be, also get less "negative attention" from Police.... oh, and other people too.

4) efficiency. cleaning up your intake and exhaust not only show immediate marked improvements but you will also get full benefit of later mods

5) start moding! as Nike says. Power is nothing without control so *I* recommend starting with suspension and light mods. I know Everyone wants the HP numbers but if you don't set up for it you'll accelerate/handle like a v-6 Accord.

You might check out "rise of an Angel" in the pictures and medea thread. Kinda shows the progress of my car over the last three years. and on that note. check out the "Build Journal" thread to see what others have done!

Best of luck!
Dave
_________________
1993 Legacy Sport Sedan 4EAT "Angel" *sold*
Post Reply