SOLD: 1991 Legacy SS

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

SOLD: 1991 Legacy SS

Post by asc_up »

SOLD

MODS

Drivetrain:

Used EJ22T with about 115k miles on it swapped in
Stock 5-speed transmission
JDM 440cc injectors
VF39 at about 17 PSI
Ultimate Racing Up-pipe and 38mm EWG
TurboXS MBC
Revtronix Stage 2 Chip
nVidia bellmouth DP and Espilir JGT500 for STi custom fitted
Catless
HKS cone filter
HKS SSQV BOV
06 WRX TMIC
Exedy Stage 1 Clutch
ACT Streetlight Flywheel

Suspension/Handling:

17x8 Rota Torques with 235/40/17 Dunlop SP Sport Summer Tires
WRX Wagon 20mm FSB
Whiteline 22mm RSB
Front strut-tower bar
Cusco rear strut-tower bar
GC8 P1 suspension
Whiteline Rear-diff bushings
Whiteline rear chassis lock bolts
03 WRX front brakes
Stock Legacy SS vented rear brakes
Turn-in Concept fender braces

Interior:

JDM "Tiger Stripe" seats from a GC8
60mm Defi Boost and EGT gauges installed in dash
JDM Momo Steering Wheel
Greddy weighted shift knob

Exterior:

20% window tint all-around
2.5RS hood scoop molded into hood
EDM Glass Headlights


I think that's all of the main crap, if I think of anything else, I'll add it in here.

Image

Image

Image

Image


Defi Video of Start-up and Location

Image
Last edited by asc_up on Wed Feb 10, 2010 12:34 am, edited 3 times in total.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
logan9691
Second Gear
Posts: 311
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:
Contact logan9691

Post by logan9691 »

any chance you can get some engine pics, i'm curious about ur vf39 setup and how is it running with the revtronix chip?
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

Yeah, I'll try to get some tomorrow. The car runs like it's stock with the Vf39 and Rev chip. No problems at all.

Only problem I did have was that my clutch started to slip, so I had a new one put it.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
logan9691
Second Gear
Posts: 311
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:
Contact logan9691

Post by logan9691 »

cool thanks.
nice car btw. wish i had $3500 atm.
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255
Top
John Drivesabox
Second Gear
Posts: 437
Joined: Fri Oct 07, 2005 8:58 pm
Location: South Whidbey Island

Post by John Drivesabox »

I might need to get a hold of you here shortly.
[quote="George McFly"] Hey you, get your damn hands off her!
[/quote]

Navy Chief, what's your specialty?
Top
brweber352
First Gear
Posts: 175
Joined: Tue Jan 05, 2010 9:01 pm
Location: Florida

Post by brweber352 »

So basically $3500 for all the parts, and the car is free :D .
Nice ride, you should have no problem getting that price if not 4k :wink: .
93'TLegWag171k StockBlock,TD05,HallmanMBC,530cc,Walbro255,shortram,LWpulley,DIS-2,MSDcoil,cxrFMIC,trans cooler/external filter,WRX wheels/brakes,CES w/Borla muffler,QTP elec cutout,REVchip2,KYB GR2,GroupN tops/all fr bushings,STImounts,GSD3 tires,LM-1,etc
Top
Aerotech
Fourth Gear
Posts: 1093
Joined: Tue Apr 13, 2004 8:37 am
Location: NYC, NY

Post by Aerotech »

brweber352 wrote:So basically $3500 for all the parts, and the car is free :D .
Nice ride, you should have no problem getting that price if not 4k :wink: .
Lot of that going around...

Sweet car, looks like my car's evil West-Coast twin. :P
Good luck w/ sale, don't take a penny less.
Jerry

'04 Passat GLS 4Motion 5MT (Subaru by VW)
'86 Vanagon Syncro Camper Garage Queen
Top
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Post by mike-tracy »

PM'd you
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Top
bepa
Second Gear
Posts: 523
Joined: Sun Jun 25, 2006 1:20 am

bump for a special SS

Post by bepa »

man that is one beautiful looking SS. finding one of these looking this sweet is hard. and I have tried.

I would hold on to this one till I got the price I was asking for it. good luck with the sale.

be well. Bepa
91 SS/ 01 MB ML 55
Bronx, NY.
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

You guys honestly think I can get $3500 or $4000 for it? To be perfectly honest, I wasn't thinking that I would get any more than $3000 for it....


I think I'll start posting it for more elsewhere, but if someone from here buys it, I'll keep it at $3,500, because I love you all and want it to go to a good home.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
ScottyS
Second Gear
Posts: 355
Joined: Sat Mar 08, 2003 6:53 am
Location: Western Nevada

Post by ScottyS »

Most important: how would rate the paint and the shell condition (minor dents, rust, etc)?

Seriously, this is awesome.
1991 SS build thread: http://bbs.legacycentral.org/viewtopic.php?t=40430
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

To be honest, I think the pictures give it more credit than it deserves. There are some dents here and there, and the scoop isn't molded in as well as it could be. The paint is fresh, but it was done at Maaco. It's not showing any signs of chipping. There is, however, some old paint showing because some jackass backed into it in a parking lot and than ran. It's nothing major, but it is noticeable.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

I just did the math and there's over $7,500 worth in parts alone. That doesn't include what I paid for the car and the engine swap.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
ScottyS
Second Gear
Posts: 355
Joined: Sat Mar 08, 2003 6:53 am
Location: Western Nevada

Post by ScottyS »

Dude, if I wasn't still in the middle of mine, I would seriously be buying this. That is what I want mine to be in the end - the hoodscoop, the VF-39, etc.

If the shell really just has minor issues, then you should be able to get $4k for sure.

Although, you have so many nice parts in there that a partout might get you more if you are after money.
1991 SS build thread: http://bbs.legacycentral.org/viewtopic.php?t=40430
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

Yeah, IF I ever parted it out, I would be asking for the stock pieces (i.e. swapping parts with the buyer), because I promised myself that I would never destroy one of these cars or leave one in pieces. They're pretty rare and it's even harder to find one that's in decent running condition AND looks nice.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
ScottyS
Second Gear
Posts: 355
Joined: Sat Mar 08, 2003 6:53 am
Location: Western Nevada

Post by ScottyS »

So, can I ask, why get rid of it just as it is getting finished?
1991 SS build thread: http://bbs.legacycentral.org/viewtopic.php?t=40430
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

To be perfectly honest, my uncle wants to sell his 2001 Audi S4 Quattro and I would LOVE to have that. Don't get me wrong, I have absolutely loved this car and it's been my baby for the past 5 years, but I want something newer and classier.

I'd like to hold on to it, but I can't afford to do that AND there's really not much else that I CAN (aside from engine swapping) do to it. I just need to stop dumping money into it.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
SubaruNation
Fifth Gear
Posts: 3526
Joined: Wed Jul 18, 2007 5:07 pm
Location: Whammy!

Post by SubaruNation »

OH MY GOD SERIOUSLY!?!?!?!?

aaron what is wrong with it?

this is so tempting to sell all my stuff and get your car.
Zach - Legacy Frankenstin
93forestpearl wrote:Keep up the good work. You'll never know what you are capable of unless you push yourself.
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

Absolutely nothing is wrong! Haha. She runs like a champ. Just had a new flywheel and clutch installed. Also, the EWG has less than 1,000 miles on it.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Post by Mattheww044 »

dude........ I would buy this in a heatbeat!!! if i had money. I bought mine just so I can do all of the work myself and learn and all that junk, but if I had money I would definately buy yours... save myself alot of money and time haha. Lucky SOB whoever gets their hands on this!
1991 Subaru Legacy SS 5MT: Revtronix Stage 2 Set-up with a few other "tasteful" mods :D
Top
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Post by Mattheww044 »

dude........ I would buy this in a heatbeat!!! if i had money. I bought mine just so I can do all of the work myself and learn and all that junk, but if I had money I would definately buy yours... save myself alot of money and time haha. Lucky SOB whoever gets their hands on this!
1991 Subaru Legacy SS 5MT: Revtronix Stage 2 Set-up with a few other "tasteful" mods :D
Top
Mattheww044
Fourth Gear
Posts: 2045
Joined: Tue Nov 28, 2006 8:17 am
Location: Spokane, WA

Post by Mattheww044 »

dude........ I would buy this in a heatbeat!!! if i had money. I bought mine just so I can do all of the work myself and learn and all that junk, but if I had money I would definately buy yours... save myself alot of money and time haha. Lucky SOB whoever gets their hands on this!
1991 Subaru Legacy SS 5MT: Revtronix Stage 2 Set-up with a few other "tasteful" mods :D
Top
sqc151
quasi-mod-o
quasi-mod-o
Posts: 1199
Joined: Wed Aug 29, 2007 2:14 am
Location: NY, NJ

Post by sqc151 »

he likes it that much he posted it 3 times... ;)
Top
SubaruNation
Fifth Gear
Posts: 3526
Joined: Wed Jul 18, 2007 5:07 pm
Location: Whammy!

Post by SubaruNation »

sqc151 wrote:he likes it that much he posted it 3 times... ;)
Seriously. i want to post more than that haha
Zach - Legacy Frankenstin
93forestpearl wrote:Keep up the good work. You'll never know what you are capable of unless you push yourself.
Top
asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

Someone buy her....
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
Top
Post Reply

Return to “Parts Shed”