will these fit?

Where the power meets the road.

Moderators: Helpinators, Moderators

Post Reply
legacy<man
In Neutral
Posts: 23
Joined: Thu Jan 21, 2010 12:16 am

will these fit?

Post by legacy<man »

http://denver.craigslist.org/pts/1574773983.html

on my 1992 subaru legacy sedan.
sqc151
quasi-mod-o
quasi-mod-o
Posts: 1199
Joined: Wed Aug 29, 2007 2:14 am
Location: NY, NJ

Post by sqc151 »

yes
brweber352
First Gear
Posts: 175
Joined: Tue Jan 05, 2010 9:01 pm
Location: Florida

Post by brweber352 »

The lug pattern for our cars and most subarus is 5x100 so these should bolt on. Without knowing the offset you can't really be sure if it will clear everything but since it was on a wrx it should clear. 8 1/2 is pretty wide and it may touch the struts when installed, and on tight turns it will probably rub something. I'm running stock wrx 16'' x 6.5'' (don't remember the offset) with 205/50 tires and only have about 8mm between the tire and struts on the rear. From what I've read, when going with that wide of a wheel it's all about offset and then maybe having to roll the fenders. You may want to do some research about negative offset and positive offset before you jump on these, or just buy them and try them and if they rub just sell them.
93'TLegWag171k StockBlock,TD05,HallmanMBC,530cc,Walbro255,shortram,LWpulley,DIS-2,MSDcoil,cxrFMIC,trans cooler/external filter,WRX wheels/brakes,CES w/Borla muffler,QTP elec cutout,REVchip2,KYB GR2,GroupN tops/all fr bushings,STImounts,GSD3 tires,LM-1,etc
Post Reply