EJ22e Rebuild

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
tsmoldt
In Neutral
Posts: 4
Joined: Tue Mar 16, 2010 6:39 am

EJ22e Rebuild

Post by tsmoldt »

Hey I am new to the forum and I was just wondering if anyone on here knows if there are any rebuild kits out there for the EJ22e. The engine is out of my 1993 legacy and after 310000 miles it is a little bit tired. Thanks for any information.
SiCkSTi04
Second Gear
Posts: 481
Joined: Sat Jun 21, 2008 11:24 pm
Location: St Pete, FL

Re: EJ22e Rebuild

Post by SiCkSTi04 »

when i did my EJ22E rebuild i stuck with OEM.
http://www.subaruparts.com/catalog/?section=767

or you could go with aftermarket kits too.
http://www.rpmmachine.com/engine-rebuil ... baru.shtml
http://importperformanceparts.net/impor ... ubaru.html

check out ebay too, just do a search for EJ22e gasket kit, timing belt/water pump kit etc. changing the timing belt tensioner would be a good idea too.

hope that helps, using the search option here will open up tons on info.
-04 WRX STi - Java Black Pearl - Cobb Stage 2
-02 Forester Type S premium - Platinum Silver Metallic - Stock
-92 Legacy Sport Sedan - Onyx Black Pearl - Stock
tsmoldt
In Neutral
Posts: 4
Joined: Tue Mar 16, 2010 6:39 am

Re: EJ22e Rebuild

Post by tsmoldt »

Thanks for the info. I'll see what I can find.
tsmoldt
In Neutral
Posts: 4
Joined: Tue Mar 16, 2010 6:39 am

Re: EJ22e Rebuild

Post by tsmoldt »

Well I got it out of the car and all apart. Now it is on my kitchen table waiting for parts.
http://i222.photobucket.com/albums/dd20 ... 002135.jpg
SiCkSTi04
Second Gear
Posts: 481
Joined: Sat Jun 21, 2008 11:24 pm
Location: St Pete, FL

Re: EJ22e Rebuild

Post by SiCkSTi04 »

wow! what are your plans for the short block? just an oem rebuild?
-04 WRX STi - Java Black Pearl - Cobb Stage 2
-02 Forester Type S premium - Platinum Silver Metallic - Stock
-92 Legacy Sport Sedan - Onyx Black Pearl - Stock
tsmoldt
In Neutral
Posts: 4
Joined: Tue Mar 16, 2010 6:39 am

Re: EJ22e Rebuild

Post by tsmoldt »

Well as of right now just an OEM rebuild, but probably with some delta cams and some headwork. And of course I've thought about trying to run a turbo but Im not sure if I have that much money to put into just the engine.
Post Reply