Seems stupid, maybe.... Update @ bottom

[cj91legss]

Ive got a 91 Wagon that im parting out, anyways almost all of the parts are gone, but i was wondering if anyone needed any quarter panels or windows off it. also the rocker panels are in ok condition. I'm scrapping it out so i'll be cutting it up in a day or two with a nice torch

Let me know

pics in this post

http://bbs.legacycentral.org/viewtopic.php?f=15&t=43701

[evolutionmovement]

If the rear quarters rust free, would you ship across country (providing shipping isn't ridiculous, which may be the case as a the cheapest I could find to send someone a set of door cards was $135)? I need both rear quarters, say about 1/2 way down the wheel arch, up to gas filler level (about the same on the other side), 10" behind the wheel arch, and the part that hides under the rear bumper cover down 6" or so. That should give me plenty of extra to play with. Save me having to form these myself, which is one of the couple remaining things that will eat the time I can spend on the car. I'm thinking $60/ea. side plus shipping (if reasonable).

If it's too much a PITA, that's cool. If you're interested, I can take a picture of the approximate area I'm talking about.

Thanks!

[cj91legss]

take a pic of exactly what you're talkin about and i'll go from there... although 60 each sounds good too so i probably wont say no...

[evolutionmovement]

I marked off what I was thinking for sections in white wax. They don't really have to go that high, but if it doesn't matter, I'd rather have more material than less. The passenger side isn't as bad, but the rot extends further down the wheel arch. F'n New England—that's easily the worst of the rust and I think that's remarkably good, and that's also after having repaired the arches previously (someone else did the work).

Left side:



Right side:

[cj91legss]

Ok, I can handle getting that stuff for you, i'll try to give you as much extra i can, i know there's a dng or 2 on the body line about 4 inches below the glass.... but it looks like you wont even need the body line.

I should have the torch within the next day or two then i'll get those off and in a box and get you a quote. what's your zip code?

[evolutionmovement]

01915.

Thanks!

[cj91legss]

alright i'll get back to you in a few days

[gijonas]

You are going to want to cut at least 6 inches more than needed if using a torch just due to the heat warp,but then thats fixable too.

[cj91legss]

Hey, here's the pics of what i got off the car for you. I took into consideration what gijonas said about the torch and used a sawzall so that there wouldn't be any heat damage to the parts for you.

Anyways here's what i got. also i got part of the RH wheel arch so you could repair that too.

it's all package and ready to ship and im going to get you a quote now. in an hour or so i will have an estimate, i'll get the cheapest i can via USPS cuz they've generally been cheapest all around.

RH





LH





And the "ULTIMATE GHETTO PACKAGING"

[evolutionmovement]

That kicks ass! You even have the inside panels, which is great. That'll be a big help.

[cj91legss]

hey it's 29.97 to ship it to you parcel which is 7-10 budsiness days or 60 to ship it priority. so looks like 150 total?

[biggreen96]

do you still have...


shipped to 84843?

[cj91legss]

i do, i'll see what condition it's in in about an hour or so

[cj91legss]

sorry for not getting back to you, it's cracked... i broke it trying to get it off the shell.

Does anyone else need anything off this before i cut it up?

[joej25t]

Hey I know this may seem strange but I am looking for a piece of floor board. To be exact I am looking for the piece of the floor that the front seats bolt to. Let me know if this would be possible.

Thanks,

-Joe

[cj91legss]

it is very possible, they will be 2 seperate pieces and shipping will probably be pricey... i will snap some pics and then you can edit and give them back so i know what you want. i know on the passenger side one of the bolt holes was stripped so i had to do a nut & bolt combo.

I'm thnking 40 each for my time + shipping?

[cj91legss]

Here's the pics. I've outlined the one hole on the passenger side where it needs a nut and bolt instead of just a bolt. Since there's an issue with it i'll take 25 for the passenger side.

Driver's Side



Passenger Side




Let me know

I'll even send you that door trim piece, i thought it was cracked but it has a small crease from my screw driver. If you want this stuff you can have the stupid trim thing... hell if i can get the driver's side one off you can have that too.

[joej25t]

This is the piece that I am looking for. Its from the driver side. I need the area that the two front seats bolt into the floor.



Uploaded with ImageShack.us

Thanks,

-Joe

[cj91legss]

oh then i thought you were wnting more of the floor... how's 35 + shipping? i'll have them out tomorrow and i'll be able to get you a quote tomorrow hopefully

[joej25t]

I could come and pick it up and save you the trouble of having to pack it I will be in Tacoma this week anyway. How does that sound?

-joe

[cj91legss]

that's fine, you want me to cut it out or drill out the spot welds?

[joej25t]

Which ever method causes less damage to the surrounding area would be nice.

Thanks,

-Joe

[cj91legss]

Cars gone now, joej25t i got the pieces off you wanted. i'll pm you

Ive got a killer deal for the wagon people.

Both rear doors in White (OK Condition, No rust, few small dings) Hatch w/ wiring (Some rust under neath where the reflector goes (Has wiper motor and brand new wiper blade) AND Both rear quarter windows (Metal is still attached to them and they have BBS LC Stickers on them.

All in white (Hatch has been spray painted white but was originally white)

60 bucks for everything

Come get this shit out of my yard so i can buy some stuff for my SS

[cj91legss]

[cj91legss]

50 bucks for everything. No lower than that....