EJ22T timing belt diy?

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
amd4me
In Neutral
Posts: 10
Joined: Mon Jul 05, 2010 11:48 pm
Location: Vancouver BC

EJ22T timing belt diy?

Post by amd4me »

Hey guys!
I just picked up a 93 legacy 5speed turbo. I love it to death!
The time has come for me to change the timing belt however I cant find a write up with pictures. Basically I need a walkthrough with pictures in order to get this job completed.

Or if any of you guys are located in Vancouver BC I would be more than willing to pay one of you guys to come out and give me a hand.



Thanks a bunch.
BSOD2600
Fourth Gear
Posts: 1636
Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA

Re: EJ22T timing belt diy?

Post by BSOD2600 »

In the stuff you need to know forum... josh has posted a bunch of FSM scans.

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
amd4me
In Neutral
Posts: 10
Joined: Mon Jul 05, 2010 11:48 pm
Location: Vancouver BC

Re: EJ22T timing belt diy?

Post by amd4me »

Im not seeing it, would you mind linking me?
BSOD2600
Fourth Gear
Posts: 1636
Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA

Re: EJ22T timing belt diy?

Post by BSOD2600 »


'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
amd4me
In Neutral
Posts: 10
Joined: Mon Jul 05, 2010 11:48 pm
Location: Vancouver BC

Re: EJ22T timing belt diy?

Post by amd4me »

Thank you very much. :)
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: EJ22T timing belt diy?

Post by Legacy777 »

You're welcome.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
AWD_addict
Fifth Gear
Posts: 2774
Joined: Sun Nov 23, 2003 12:22 am
Location: Western WA!

Re: EJ22T timing belt diy?

Post by AWD_addict »

Be careful with the water pump bolts, they can be corroded and break easily.
90 L+ wgn
Post Reply