Finally! The Dream of Dreams - EJ22T

evolutionmovement · Post by **evolutionmovement** » Tue Nov 04, 2003 7:11 pm

Picked up my new (well, 86K mi) engine from Maine yesterday. Back still hurts from getting it out of the wagon to where I could use the crane to lift it into the kitchen. It was worth it. What a thing of beauty! Can't wait to get started on it.

Steve

entirelyturbo · Post by **entirelyturbo** » Tue Nov 04, 2003 7:30 pm

The kitchen?? You can't be married

Way cool! Is your wagon a 90? Are you going to make another 90 5MT turbo wagon?

Brat4by4 · Post by **Brat4by4** » Tue Nov 04, 2003 10:32 pm

I'm happy for you man. Can't wait till you can get that thing in your car. You'll love it, believe me.

evolutionmovement · Post by **evolutionmovement** » Wed Nov 05, 2003 12:27 am

Yes, it's going to be a 5MT 90 L wagon with no obvious outside changes. I'm thinking of using an AWIC so I don't need a scoop either. Someday, ricers, when you least expect it...

Steve

legacy92ej22t · Post by **legacy92ej22t** » Wed Nov 05, 2003 1:14 am

Sweet! I want to see pics of it in your kitchen

entirelyturbo · Post by **entirelyturbo** » Wed Nov 05, 2003 5:00 am

Perfect idea, Steve! I just love the idea of having a Legacy appear to be a basic L on the outside, completely unable to tell there's an EJ22T sitting under the hood!!!

evolutionmovement · Post by **evolutionmovement** » Wed Nov 05, 2003 7:22 am

If I can get at least one of the USB drives on my computer working again, i'll be able to get some pictures.
Steve

970subaru · Post by **970subaru** » Wed Nov 05, 2003 7:38 am

evolutionmovement wrote:Picked up my new (well, 86K mi) engine from Maine yesterday. Back still hurts from getting it out of the wagon to where I could use the crane to lift it into the kitchen. It was worth it. What a thing of beauty! Can't wait to get started on it.

Steve

damn he carries engines. my dad got a hernia from trying to lift a vw longblock out of the trunk. lessee some pics.

vrg3 · Post by **vrg3** » Wed Nov 05, 2003 7:43 am

Not that it's easy lifting, but EJ-series engines are all aluminum, which helps...

THAWA · Post by **THAWA** » Wed Nov 05, 2003 7:44 am

they're only like 500-600 lbs or something right?

vrg3 · Post by **vrg3** » Wed Nov 05, 2003 7:54 am

I'd guess about half that, without fluids. I've lifted an EJ18 myself, and I'm not really in very good shape.

scottzg · Post by **scottzg** » Wed Nov 05, 2003 9:32 am

wouldnt an ej 18 shortblock be heavier than a ej22t shortblock? By only a few ounces of course...

vrg3 · Post by **vrg3** » Wed Nov 05, 2003 9:39 am

Why would it be heavier? More piston material?

I was lifting an engine assembly, not a short block. It was the long block plus some accessories (alternator, P/S pump, intake manifold, A/C compressor, etc).

scottzg · Post by **scottzg** » Wed Nov 05, 2003 9:47 am

open deck, more piston material, otherwise the same? I dont know

entirelyturbo · Post by **entirelyturbo** » Wed Nov 05, 2003 4:28 pm

OT, but engines aren't that hard to pick up. Remember, I work in a parts department in a Yota dealer. I frequently pick up 4cyl short blocks, and everyone thinks I'm Hercules for doing it. The saying "use your legs, not your back" is 100% true. I have moved two engines, one right after the other, without even feeling tired...

evolutionmovement · Post by **evolutionmovement** » Wed Nov 05, 2003 7:00 pm

I had a friend help me carry it to the steps. I'd say it weighs a little over 250 lbs with the turbo attached. Turbo seems good, too.

Steve

ciper · Post by **ciper** » Fri Jan 16, 2004 1:13 am

Old thread back to life, I can comment on the weights of an EJ22 engine. Im fairly certain that a 4eat is quite a bit heavier than the engine itself. I was able to lift the engine, the transmission was REALLY heavy compared to it.

mTk · Post by **mTk** » Fri Jan 16, 2004 2:19 am

ciper wrote:Old thread back to life, I can comment on the weights of an EJ22 engine. Im fairly certain that a 4eat is quite a bit heavier than the engine itself. I was able to lift the engine, the transmission was REALLY heavy compared to it.

I agree with this 100% The ej22t is easy enough to carry around, a 4eat otoh is like a brick of lead.

I was expecting my new 5mt to be somewhat lighter than the 4eat, and it is by a whole hell of a lot. Carried that sucker into the garage like nothing

MK

evolutionmovement · Post by **evolutionmovement** » Sun Jan 25, 2004 11:12 pm

Finally got an impact wrench and got the heads off. All crosshatching visible in the cylinders, no discernable wear on the cams or rockers, and the valves and seals even seem nearly new.

Steve

damonmlime · Post by **damonmlime** » Tue Jan 27, 2004 11:31 pm

hey evolutionmovement, would you mind telling me about how much you paid for that engine? i'm buying one for $400 complete w/everything but alternator and crossmember btw 72k. thanks damon

THAWA · Post by **THAWA** » Tue Jan 27, 2004 11:44 pm

that sounds like a good deal, what was wrong with the car? and where are you putting it?

evolutionmovement · Post by **evolutionmovement** » Tue Jan 27, 2004 11:54 pm

damonmlime - sounds like you're getting a real steal. I paid $750 with turbo, but no accessories or crossmember and the ECU was sold already. Up here, though, these engines aren't easy to get. I had to drive over 3 hrs. for this one. I have no complaints, though, everything seems almost brand new.

thawa - I have no idea what happened to the car, I would assume a wreck. They strip cars and put the parts in big steel warehouse buildings on shelves. I don't know what happens to the whole cars, but I don't want to think about it. Junkyards make me sad as it is. The place is called Aable Auto Parts. They're in Maine.

Steve

subafreak · Post by **subafreak** » Sat Feb 07, 2004 4:17 am

So Steve, what are you doing for engine managment on this beast?

evolutionmovement · Post by **evolutionmovement** » Sat Feb 07, 2004 6:29 am

I was thinking about going stock with some piggybacks just to get it in there as a start, but now I'm not sure. It would depend on money, patience, and availability of something with good base maps already. I don't know of any place around here to tune it so I need something that's user friendly. Looks like I may have to do it myself and I have no access to a dyno.

Steve

subafreak · Post by **subafreak** » Sat Feb 07, 2004 2:10 pm

It will work pretty good with the stock NA ECU. Thats basicly the same set up I,m running in my Loyal. I just have the wastgate valve running right back to mannifold pressure so it runs about 7 to 10 psi depending on how hard I get on it. The only difference is that I'm running an NA block with all the turbo stuff on it, so I have a higher compression ratio. I run on 93 octane and the only time I get pinging is high RPM (6,000), high boost (10psi). You should even be better off with the lower compression, all you have to do is swap the wireing harness off your NA intake and put it on the Turbo intake, and swap the NA injectors into the turbo intake. This will get you on the road and flying with your new turbo power, then later as time and money permits you can get some piggy backs and start tuneing.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Finally! The Dream of Dreams - EJ22T

Finally! The Dream of Dreams - EJ22T

Re: Finally! The Dream of Dreams - EJ22T