i was driving my car to a repair shop last evening. my clutch is all worn out so i was very often up in the 7k rpm range to get it moving
when i came to the shop, after letting the car idle a bit to cool down, i shut it off, and steam came out of my exp. tank. not from the cap on the lid, but from where the lid meets the bottom of the exp. tank. i have a tank that looks like this http://cgi.ebay.co.uk/Subaru-Impreza-Ex ... 335ea71b5b
what do you think this can be? the repair dude is also going to install a new water pump and timing belt for me. i hope its not the head gasket. but my car didnt overheat when driving it. it mustve been pretty hot in the motor.
If i'm understanding you right, you mean the top of the tank that bolts to the bowl part of the tank? I've never unbolted the top of mine but i suspect there is probably a gasket or at least silicone that seals the two halves together. So if bubbles are coming out of it, take it apart, clean it, and reseal it.
93 Black Legacy SS
93 Legacy
97 Outback- EJ25D/22e frankenmotor
97 Green Outback
97 Red Legacy GT
98 Silver Legacy GT- Pikes Peak build, built EJ22t/205, GT3076r
99 Black Legacy GT wagon