I changed my right rear abs sensor today, but the abs ecu still complains about it. I didn't drive it, I just started it up after replacing it and after a minute or so it started to blink code 7.
Does anyone know what the sensor should read? Is it just resistance and if so, how much should it read when it is in front of and between teeth?
What should the abs sensor read?
Moderators: Helpinators, Moderators
What should the abs sensor read?
Subaru Legacy Turbo 1992 - it's alive (but not done). VEMS ecu, 6mt, Wiseco/Eagle internals, Hybrid GT FMIC, 550cc, TD05 Big 16g @ 22psi, dynoed 294/293.
Now being parted out
Now being parted out
Re: What should the abs sensor read?
Well I've got some conflicting info from the FSM, It's telling me "Specified Voltage: 0.8 - 1.3 kohms"
Since obviously voltage isn't measured in ohms, I'm not sure sure what's incorrect, the units or the wording. What I'd suggest is measure the resistance on one of the other sensors that you know is working and good, and compare it to the one that is giving you problems. If the resistance is similar/same, I'd check the wiring and or the tone wheel.
Since obviously voltage isn't measured in ohms, I'm not sure sure what's incorrect, the units or the wording. What I'd suggest is measure the resistance on one of the other sensors that you know is working and good, and compare it to the one that is giving you problems. If the resistance is similar/same, I'd check the wiring and or the tone wheel.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: What should the abs sensor read?
I'd interpret "0.8 - 1.3 kohms" to mean 800 to 1300 ohms. Since when wasn't resistance measured in ohms btw? http://en.wikipedia.org/wiki/Ohm
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
-
soundman353
- In Neutral
- Posts: 34
- Joined: Wed Oct 17, 2007 4:21 am
- Location: Warriors Mark, Pennsylvania
Re: What should the abs sensor read?
That is what they drilled into my head in electronics class. +2 on checking the wiring especially clean the connector(s).BSOD2600 wrote:I'd interpret "0.8 - 1.3 kohms" to mean 800 to 1300 ohms. Since when wasn't resistance measured in ohms btw? http://en.wikipedia.org/wiki/Ohm
Re: What should the abs sensor read?
That should have read "voltage" not "resistance". Sorry for the confusion.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: What should the abs sensor read?
Odd. I measured on one of the other sensors and it returned nothing. Will try the rest and check my multimeter.
Subaru Legacy Turbo 1992 - it's alive (but not done). VEMS ecu, 6mt, Wiseco/Eagle internals, Hybrid GT FMIC, 550cc, TD05 Big 16g @ 22psi, dynoed 294/293.
Now being parted out
Now being parted out
Re: What should the abs sensor read?
you need to drive it!!!!!!! at least 10 feet or so. I battled abs sensors for a while and ended up replacing one that the code never went away.
-Mike
2011 Infiniti G37x Sedan - Current
2007 Ducati 800ss - Current
1994 Subaru Legacy Sport Wagon (White)
1994 Subaru Legacy Sport Wagon (Silver)
2003 Infiniri G35
1998 Infiniti I30t
1995 Honda Civic DX
1987 Subaru GL Wagon
1987 Subaru Loyale
2011 Infiniti G37x Sedan - Current
2007 Ducati 800ss - Current
1994 Subaru Legacy Sport Wagon (White)
1994 Subaru Legacy Sport Wagon (Silver)
2003 Infiniri G35
1998 Infiniti I30t
1995 Honda Civic DX
1987 Subaru GL Wagon
1987 Subaru Loyale