so i have a 91 legacy wagon awd, i swaped from an auto drivetrain to a full 92 turbo ss drivetrain.... everythinig is good except for my speedo doesnt work and my car will want to die sometimes when i go to stop and the check engine light comes on.... i googled it and found someone with the same problems..... im useiing the na auto cable could that be the problem or could mine just be broken somewhere?
i can hear clicking behind my speedo and on the odometer after a couple weeks of driving the first number has gotten to 3.... i made sure it was plugged in behind the cluster and im pretty sure i got it in the transmission.
help please!!!! this is my daily and i drive an hour to work everyday!!
thanks, eric
253 230 5170
erictheboss253@gmail.com
text or email would be that fastest way for me to receive help!
hm damn speedo
Moderators: Helpinators, Moderators
-
- In Neutral
- Posts: 35
- Joined: Sat Oct 30, 2010 7:22 am
- Location: wa
hm damn speedo
91 legacy- lifted turbo Frankenstein
87 244 - drift build in process - ex dd
82 starlet- 4agte
78 510 - dd
87 244 - drift build in process - ex dd
82 starlet- 4agte
78 510 - dd
Re: hm damn speedo
Did you read the 5MT swap guide from this forum josh wrote up?
Did you forget to snip the ECU identification pin so it thinks a 5MT is connected instead of the 4EAT?
Does your speedometer work? sounding like no, which will cause some issues.
Did you forget to snip the ECU identification pin so it thinks a 5MT is connected instead of the 4EAT?
Does your speedometer work? sounding like no, which will cause some issues.
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
-
- In Neutral
- Posts: 35
- Joined: Sat Oct 30, 2010 7:22 am
- Location: wa
Re: hm damn speedo
its fixed.....
"feels like idiot"
haha i was aways to lazy to pull the cable from the trans i would just push on it, i pulled it out gace the metal part a little twist flipped the clip the right way pushed it all the way in and put the clip the correct position and now it works... horay for getting off my ass lmao
thanks!
"feels like idiot"
haha i was aways to lazy to pull the cable from the trans i would just push on it, i pulled it out gace the metal part a little twist flipped the clip the right way pushed it all the way in and put the clip the correct position and now it works... horay for getting off my ass lmao
thanks!
91 legacy- lifted turbo Frankenstein
87 244 - drift build in process - ex dd
82 starlet- 4agte
78 510 - dd
87 244 - drift build in process - ex dd
82 starlet- 4agte
78 510 - dd