WTT TD04 wastegate actuator for VF11 one

[amoore131]

I'll be doing my EJ22 turbo setup this summer and I'm not looking at running more than 5-6 psi.

I have a TD04 in good condition so I'm looking to swap the wastegate actuator from it (Read its an 8-10psi one) for a VF11 one (Read its a 5-6psi one).

So anyone that may be looking to add a little more boost to their VF11/Turbo Legacy, this should be a virtually cost free option!

I'm located in Timonium MD and willing to meet up to a reasonable distance and possibly ship if we could work something out.

PM with interest

Alex

[amoore131]

BUMP

[amoore131]

Bumpin it

[Subiel94]

My td04 wastegate opens at 6-7 psi. Just saying. I'm not selling.

[amoore131]

Well I read that the newer TD04's (06/07) open at that setting but everyone says that the 02-05 TD04's open at 9-10psi

[speedmaxx]

I'm in the same boat turboing my ej22 na. I got myself a 05 wrx td04.

But from what I'm finding, although the wastgate is at like 8-10psi once it's all hooked up don't be surprised if your boost gauge is only showing like 6psi.

Well that is what I have found from searching online, not to sure if it's right but seems like it makes sence. I mean u gotta lose some preasure somewhere, unless u got the most amazing and perfect set up ever.

[ericem]

Remember though from year to year they have different size restrictor pills so in some cases wastegate boost was dependent of the restrictor pill.

[Subiel94]

Your wastegate solenoid I'm pretty sure restricts the boost levels.

[amoore131]

I'm not sure exactly what the boost solenoid does but I'm pretty sure you don't need it because the wastegate opens on its set pressure level.