JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
***SOLD***
I have a few things left over from an EJ20H that I need to get rid of. They are just taking up space, but I figure somebody may want them, so everything is best offer. Here's how it's gonna work, to make it worth my time I want to end up with $100, so for $100 you can have as much of this stuff as you want to pay shipping for. If you want to offer less than $100 for something be specific and once I get offers that add up to $100+ship I'll split it up. Send all offers via PM.
I have both fully dressed heads, I think I remember hearing some leaking valves when I did a leakdown test after I first got the engine, the cams, valvecovers, and single bolt coils are also there, but not shown in the pictures
Here are the camgears and timing covers (the cover on the bottem left of the picture is slightly broken at the top)
And a crank timing gear and the water neck
Intake, with wiring harness and gray sidefeed injectors / rails (380cc, I think?)
The alternator
I have a few things left over from an EJ20H that I need to get rid of. They are just taking up space, but I figure somebody may want them, so everything is best offer. Here's how it's gonna work, to make it worth my time I want to end up with $100, so for $100 you can have as much of this stuff as you want to pay shipping for. If you want to offer less than $100 for something be specific and once I get offers that add up to $100+ship I'll split it up. Send all offers via PM.
I have both fully dressed heads, I think I remember hearing some leaking valves when I did a leakdown test after I first got the engine, the cams, valvecovers, and single bolt coils are also there, but not shown in the pictures
Here are the camgears and timing covers (the cover on the bottem left of the picture is slightly broken at the top)
And a crank timing gear and the water neck
Intake, with wiring harness and gray sidefeed injectors / rails (380cc, I think?)
The alternator
Last edited by supraglen on Fri May 20, 2011 11:34 pm, edited 3 times in total.
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
Oh I also have the 5-speed trans that came with this engine, if anyone can use that, that's outside the $100 deal though and of course shipping transmissions sucks. The code is 85-TY752VBAAA, make an offer.
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
I sent you a PM!
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
where r u located
92 turbo legacy: RWD W58 SWAP, td04, 3"tbe, mbc, fmic, wrx brakes/hubs, wrx seats, welded 4.11, fcd, drift steering wheel, Drifting Stickers
-
- Fifth Gear
- Posts: 6322
- Joined: Fri Jun 20, 2008 8:17 am
- Location: Lakewood, Wa 98439
- Contact:
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
Yeah, location would be awesome, you should update your location in the User Control Panel
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
Oops, sorry, Minneapolis MN
-
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
How much for shipping the heads/gears and the manifold?
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
Did you get my pm?
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, MAF, ETC
Yes I did, sorry, I just didn't have time to call during the day
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
MAF sold to kimokalihi, still looking for $100 total for the rest, I will try to weigh the stuff tomorrow so I can do shipping estimates.
-
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
Oh, and my zip is 29651. Might help if you needed to know where shipping was to.....
Edit: If all the rest is available I will most likely take it all. The new motor needs good heads something bad.....
Edit: If all the rest is available I will most likely take it all. The new motor needs good heads something bad.....
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
Don't suppose you've had a chance to check on this yet?
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
Sorry guys I'm way busy getting the racecar ready for a test day next week. I will try to weigh the parts tomorrow.
-
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
It's all good. Gonna be a bit before I can get around to building the new motor anyways.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
According to my crappy bathroom scale...
Heads are a little over 30# each
cam gears and covers 10#
intake is 20#
alternator is 10#
Heads are a little over 30# each
cam gears and covers 10#
intake is 20#
alternator is 10#
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
USPS max weight is 70#, I can get both heads in one shipment, but nothing else, that would be $42. To get the rest would be a second package at ~40#, which would be another $26. So for ~$168 you can have it all, sounds like a bargain.IronMonkeyL255 wrote:Oh, and my zip is 29651. Might help if you needed to know where shipping was to.....
Edit: If all the rest is available I will most likely take it all. The new motor needs good heads something bad.....
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
I received the airbox the other day, thanks! Looks like it should work perfectly...as soon as I get a new silicone hose for it.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
everything sold?
Brad
1991 Subaru Legacy L AWD Wagon 5MT (DD)
2000 Outback 5MT (DD)
2005 AW STi
2010 LGT (hers)
1998 Outback (her DD)
Build Thread
1991 Subaru Legacy L AWD Wagon 5MT (DD)
2000 Outback 5MT (DD)
2005 AW STi
2010 LGT (hers)
1998 Outback (her DD)
Build Thread
Re: JDM EJ20H Leftovers - Heads, Intake, Injectors, ETC.
Yup, long gone