The counter top measures 72" by 21" and the sinks measure 18 3/4" from outside edge of metal ring. There's alittle over 10-1/2" between the sinks and the edges, so you can cut this countertop down to be about 52-53" wide. So there's much room for adjustment here.
It's in pretty decent condition, one sink could use a fresh coat of paint. I think the porcelain paint is inexpensive, or ceramic paint. One sink also has some small nicks in it on top, but they don't leak. Under one of the faucets i found a little but of rust which can be brushed off with a wire wheel and repainted, or just put the faucet on and you wont see it.
The fermica on top is in pretty good condition, has some small nicks on one side of it where it mounts to the wall, can easily be covered with caulk.
I spent the a decent amount of time removing the old faucets, drains, and cleaning the countertop so it's clean and ready to install.
Get ahold of me anytime at 253 332 8158 I also accept paypal.
Chris
