First off the jdm EJ20G off of a 97 forestor VIN number is ej20gdw1ny. Motor was purchased in may of 2009 for Jhot importers out of Denton Texas. I had the motor compression and leakdown tested to insure it was going to be a strong a reliable motor. It does not smoke, Ive always ran stock boost (8psi) and turbo (td04) has absolutely zero shaft play. Motor had 42 thousand kilometers on it when pulled. Since then Ive racked up an additional 8k thousand miles. Ive added new intake gaskets,Spark plugs,plug wires,coolant temp sensor,K&n drop in filter, and a new knock sensor. If your looking for a complete drop in/bolt on motor swap this is it. Ive made a custom bracket to fit the stock throttle/cruise control linkage and it also has a 91ss engine harness. All the guess work is already done, all you guys with a SS that always wanted a dohc jdm ej20 here it is. Price is 1100 OBO!!.It will come with everything you see in the picture along with a 06 wrx tmic. As of right now I am not going to ship this out.
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01227.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01226.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01225.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01224.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01223.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01222.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01221.jpg)
GC/BD/BC JDM STI carbon fiber strut bar SOLD!!!!!!!!!
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01199.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01200.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01201.jpg)
JDM STI shift knob (titanium) It has some very light scratch's at the top that are barley noticeable $35 OBO plus shipping
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01198.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01197.jpg)
The handling package- Eibach springs, Eibach camber bolts,front Noltec camber plates (brand new), kyb gr-2 struts front are new rears have about 10k on them, Superpro rack bushings SOLD!!!!!!!!!!!!!
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01202.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01204.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01205.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01206.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01207.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01208.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01209.jpg)
Lamco boost gauge $45 obo plus shipping
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01215.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01216.jpg)
Pre facelift edm headlights (89-91) Yeah this is the real deal they were bought from timo so you know they are good quality. Since then I did the h1 conversion so its a complete bolt on. They will come with the turn signal lights and the leveling switch. SOLD!!!!!!!!!!!!!
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01210.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01211.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01212.jpg)
WRX 6 disc cd changer with the harness conversion and the pin conversion for fm radio. $45 obo plus shipping
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01218.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01219.jpg)
![Image](http://i21.photobucket.com/albums/b264/trdevelopment/DSC01220.jpg)
NRG 4pt seatsbelt harness brand new $90 obo plus shipping
http://i21.photobucket.com/albums/b264/ ... t/0022.jpg
http://i21.photobucket.com/albums/b264/ ... nt/001.jpg