FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts...
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts...
Here's what I have left... BUMP *I am negotiable on prices, if you buy more than one item*
SS/L Compatible:
SS Water pump -used $15
SS Oil pump -used $30
Bridgestone Blizzaks w/ 90% tread-SOLD
SS Wheels 5x100 bolt pattern: 15" $100
1 pair of front fenders with no rust $80 each
Headlights $20 each
Alternator *Almost Brand new* $125 *has like 500 miles on it*
N/A MAF sensor
L model only *as far as I know*:
Head Gasket set and misc gaskets $45
2 injector pigtails $15
2 Crank Sensor pigtails $20
Radiator $60
Radiator Hoses $15
Coil Pack $15
Plug Wires $15 1200 miles on em
I also have a full set of Turbo Legacy Brake rotors and front calipers $200
TMIC from 03' WRX $75
SS/L Compatible:
SS Water pump -used $15
SS Oil pump -used $30
Bridgestone Blizzaks w/ 90% tread-SOLD
SS Wheels 5x100 bolt pattern: 15" $100
1 pair of front fenders with no rust $80 each
Headlights $20 each
Alternator *Almost Brand new* $125 *has like 500 miles on it*
N/A MAF sensor
L model only *as far as I know*:
Head Gasket set and misc gaskets $45
2 injector pigtails $15
2 Crank Sensor pigtails $20
Radiator $60
Radiator Hoses $15
Coil Pack $15
Plug Wires $15 1200 miles on em
I also have a full set of Turbo Legacy Brake rotors and front calipers $200
TMIC from 03' WRX $75
Last edited by Legacy Rally Guy on Wed Dec 28, 2011 8:21 pm, edited 2 times in total.
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
are the blizzax on rims?
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
They're on the SS rims, yes.batlegacy wrote:are the blizzax on rims?
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
How many miles? Any problems with the tires? Are those the ones pictured?
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
I'd say there's about 7k to 8k miles on them, almost all highway. I slapped em on the Legacy right after I installed the torque converter last June and I've never had any problems at all. And yes, those pictured are the ones I'm sellingbatlegacy wrote:How many miles? Any problems with the tires? Are those the ones pictured?
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
- In Neutral
- Posts: 38
- Joined: Wed Nov 02, 2011 12:32 am
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Any chance it's ABS and you have a rear sensor in good shape?
If so, there may be other parts I need as well.
If so, there may be other parts I need as well.
2006 Honda CBR600RR 39k miles
2003 Mitusbishi Montero Sport LS AWD 121k miles
1992 Subaru Loyale Wagon EA82 4WD 5 Speed 333k miles
1991 Subaru Legacy L Wagon EJ22 AWD 5 Speed 240k miles
1979 Suzuki GS850GN 48k miles
1973 Ford F100 302ci 2WD 69k miles
2003 Mitusbishi Montero Sport LS AWD 121k miles
1992 Subaru Loyale Wagon EA82 4WD 5 Speed 333k miles
1991 Subaru Legacy L Wagon EJ22 AWD 5 Speed 240k miles
1979 Suzuki GS850GN 48k miles
1973 Ford F100 302ci 2WD 69k miles
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
no, but I have some spare ABS parts from my sport sedan lying around.cal_look_zero wrote:Any chance it's ABS and you have a rear sensor in good shape?
If so, there may be other parts I need as well.
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
- In Neutral
- Posts: 38
- Joined: Wed Nov 02, 2011 12:32 am
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Not that I'm a fan of ABS, but I would like to fix it in my car nonetheless. I could definitely use a new driver rear sensor. If you can find one, I'd also like the driver headlight and corner marker, and a tan passenger sun visor if you have one. Thanks.
2006 Honda CBR600RR 39k miles
2003 Mitusbishi Montero Sport LS AWD 121k miles
1992 Subaru Loyale Wagon EA82 4WD 5 Speed 333k miles
1991 Subaru Legacy L Wagon EJ22 AWD 5 Speed 240k miles
1979 Suzuki GS850GN 48k miles
1973 Ford F100 302ci 2WD 69k miles
2003 Mitusbishi Montero Sport LS AWD 121k miles
1992 Subaru Loyale Wagon EA82 4WD 5 Speed 333k miles
1991 Subaru Legacy L Wagon EJ22 AWD 5 Speed 240k miles
1979 Suzuki GS850GN 48k miles
1973 Ford F100 302ci 2WD 69k miles
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
cal_look_zero wrote:Not that I'm a fan of ABS, but I would like to fix it in my car nonetheless. I could definitely use a new driver rear sensor. If you can find one, I'd also like the driver headlight and corner marker, and a tan passenger sun visor if you have one. Thanks.
Hmm, I dont have the sensor, I have a left over RH-Rear Sensor and some tone wheels/hub/knuckle.
I WOULD however have the full conversion kit to go non-ABS if you like, my brake lines are in great shape and you'd just disconnect the sensors... And install the break lines under the hood. I didn't get a chance to check out the availability of the rebuild kit. I can tomorrow, I work at a parts store, and can get you the part kit number, so you could buy it at your local Oreilly parts store. Through a regular mechanic, you're looking at about $350 for the master rebuild kit.
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Update Bump on parts... Look at original post...
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Where are you located in MO? I'm quite interested in the Blizzaks for the rally car and I live in St. Louis
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
I'm juuust south of Macon, MO.MConte05 wrote:Where are you located in MO? I'm quite interested in the Blizzaks for the rally car and I live in St. Louis
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
- In Neutral
- Posts: 34
- Joined: Sun Jan 10, 2010 5:55 pm
- Location: St Louis MO , Lake of the Ozarks
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Hi Im located in Lake of the Ozarks/Camdenton MO..Im looking for a used 2.2 na engine for my 93 Legacy LS AWD Wagon or possibly parts/vendors/rebuilders in MO to rebuild the spare 2.2 na longblock I have...Not sure how much $ it will take to rebuild it but was hoping you may be able to help or steer me in the right direction??? Thanks Tom
1993 Subaru Legacy LS AWD Wagon- PnuttButtr
1973 Plymouth Duster pro-street
1973 Plymouth Duster pro-street
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Just sold the tires the other day, sorry ^.^ I still have the wheels in black and some 14"MConte05 wrote:Where are you located in MO? I'm quite interested in the Blizzaks for the rally car and I live in St. Louis
steelies.
thanks, man
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
do you have any idea if those rims will fit over 02 wrx brakes... thanks
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Replied to all emails bump!
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
reecers wrote:do you have any idea if those rims will fit over 02 wrx brakes... thanks
I could check, they really should, since the Sport Sedan brakes are quite heavy duty and they clear no prob. I've a buddy with an 02' WRX, I'll ask if we could trial fit a wheel on the front. ^.^
I do know they'll clear my 98' Forester S calipers no prob.
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
parts updated... bumpy
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
do you still have the rocker arm asembly? pm me
93 Legacy l AWD 5mt
87 GL-10 Turbo 5mt
87 GL-10 Turbo 5mt
-
- Third Gear
- Posts: 586
- Joined: Tue May 23, 2006 2:30 pm
- Location: Northern Missouri
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Remaining parts and price updates. Radiator and fenders back on the list, they didn't sell...
1991 Legacy N/A- Being built to withstand zombie apocalypse!
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
2004 WRX STi- (GT3076r, 850cc Deatchwerks, Unequal Length Headers, FMIC, Alum Driveshaft, Camber Kit, Daily Driver)
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
Still got that rad? Is it OE or aftermarket OE replacement? Price shipped to 30076? Thanks.
1992 SS 5MT
She's growing faster in her old age!
She's growing faster in her old age!
Re: FS: MO, 91' NA Auto Legacy Part Out and some 91 SS parts
^ the op has not been on since march! you should check ebay.
sidenote human graveyard next to auto graveyard hells bells! this thread should of stayed in the graveyard.
sidenote human graveyard next to auto graveyard hells bells! this thread should of stayed in the graveyard.
MY93BC Legacy Sonora Sand---> black plasti-dip?
MY93GC Impreza Amethyst--> Glacier/aspen/pd White
93BC"edm" 93GC 90BC R.I.P.
MY93GC Impreza Amethyst--> Glacier/aspen/pd White
93BC"edm" 93GC 90BC R.I.P.