NA oil catch can help
Moderators: Helpinators, Moderators
-
- In Neutral
- Posts: 44
- Joined: Sun Oct 16, 2011 6:40 am
- Location: Vancouver, wa
NA oil catch can help
I've noticed that I get oil in and around my intake a little bit and was reading online about people with NA 2.5s having good luck with oil catch cans and was wondering how exactly I would mount one to my car. I have been doing some research and think I understand exactly how it would mount but it would be nice to get some solid facts.
Adam
Northwest
Used to own a Legacy. Drive a Aircooled VW now.
Northwest
Used to own a Legacy. Drive a Aircooled VW now.
-
- In Neutral
- Posts: 44
- Joined: Sun Oct 16, 2011 6:40 am
- Location: Vancouver, wa
Re: NA oil catch can help
Im sure someone knows!
Adam
Northwest
Used to own a Legacy. Drive a Aircooled VW now.
Northwest
Used to own a Legacy. Drive a Aircooled VW now.
Re: NA oil catch can help
Here's the pcv system diagram.
http://www.main.experiencetherave.com/s ... system.jpg
You need to put the catch can on the outlet on the back of the engine. Route the line from the vent on the back of the engine, run it into the catch can, then tee the line out of the catch can into the PCV valve and the existing breather going to the intake.
http://www.main.experiencetherave.com/s ... system.jpg
You need to put the catch can on the outlet on the back of the engine. Route the line from the vent on the back of the engine, run it into the catch can, then tee the line out of the catch can into the PCV valve and the existing breather going to the intake.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm