cleaning out my parts...
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
cleaning out my parts...
So I am leaving for four or five months this summer, and decided to sell some of my parts. Most is for my 1st gen leggy but we all know subies are like legos, it all fits.
Ej257 con rods 52mm $75
04 STI springs $80
EJ22t parts.
Factory ej22t head gaskets $100
SOHC heads complete $100
x2 ver1 crank shafts (thrust #3) $75 each
No name up pipe with EWG flange and EWG(not working?) $50 any ej
complete exhaust manifold w/ cat less up pipe $100 any ej
Exhaust collectors w/cross pipe not bolted up $75 any ej
X2 oil pump $45 each any ej 2.2 or smaller
X2 turbo style water pump $45 each any ej
.020 over wiesco pistons 8.5 cr 6000 miles $200
X2 stock rods 52mm $50 each set
X3 intake manifolds bare $50 each
X2 throttle body's $20 each
X2 360cc injectors with rails $75 each set
Remote coolant res. $65
x2 oil pans w/ pick up and windage tray $35 each set any ej
also i have a 93 parts car with no engine but every thing else. i bought it then found out (seen) the fame is bent.
EVERY THING OBO! And willing to ship ant buyers expense only.
fastest way to get a hold of me would be txt. eight 0 one 819 93 95 Andrew
Ej257 con rods 52mm $75
04 STI springs $80
EJ22t parts.
Factory ej22t head gaskets $100
SOHC heads complete $100
x2 ver1 crank shafts (thrust #3) $75 each
No name up pipe with EWG flange and EWG(not working?) $50 any ej
complete exhaust manifold w/ cat less up pipe $100 any ej
Exhaust collectors w/cross pipe not bolted up $75 any ej
X2 oil pump $45 each any ej 2.2 or smaller
X2 turbo style water pump $45 each any ej
.020 over wiesco pistons 8.5 cr 6000 miles $200
X2 stock rods 52mm $50 each set
X3 intake manifolds bare $50 each
X2 throttle body's $20 each
X2 360cc injectors with rails $75 each set
Remote coolant res. $65
x2 oil pans w/ pick up and windage tray $35 each set any ej
also i have a 93 parts car with no engine but every thing else. i bought it then found out (seen) the fame is bent.
EVERY THING OBO! And willing to ship ant buyers expense only.
fastest way to get a hold of me would be txt. eight 0 one 819 93 95 Andrew
Last edited by Rubasu on Wed Mar 28, 2012 3:45 pm, edited 1 time in total.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
-
- Fifth Gear
- Posts: 2385
- Joined: Tue Mar 13, 2007 12:56 am
- Location: 10-9-oh(!), wa
Re: cleaning out my parts...
More details on the pistons, please.
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.
Re: cleaning out my parts...
Sun visors?
Re: cleaning out my parts...
the pistons i used for my last build. drove it for about 6000 miles when my dampner came loose and effed up my crank. i lost my #5 main bearing and so i tore the motor down and just got a closed deck 20g to replace it. i woould keep them just dont have the time or money for a build right now. plus i sold my spare blocks.beatersubi wrote:More details on the pistons, please.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
yes out of my new parts car i do. i believe they are the stock ss color.subydaddy wrote:Sun visors?
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
bump added head gaskets!
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
-
- Fifth Gear
- Posts: 2385
- Joined: Tue Mar 13, 2007 12:56 am
- Location: 10-9-oh(!), wa
Re: cleaning out my parts...
Compression height, bore, dish, cc, etc.? Or a part number, if you have it. Are they designed to be used with stock heads or 20G/25D?Rubasu wrote:the pistons i used for my last build. drove it for about 6000 miles when my dampner came loose and effed up my crank. i lost my #5 main bearing and so i tore the motor down and just got a closed deck 20g to replace it. i woould keep them just dont have the time or money for a build right now. plus i sold my spare blocks.beatersubi wrote:More details on the pistons, please.
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.
Re: cleaning out my parts...
Consider the ewg sold pending pics.
Re: cleaning out my parts...
What color interior of parts car? If black can you PM price of door cards shipped to 86406?
lucas wrote:There were multiple Legacys with 300k+ miles. Jesus will return on a Turbo Lego.
Re: cleaning out my parts...
the door cards are black but one of them needs to be re upolstered.
and ill get so pics of the EWG to you guesswho
and ill get so pics of the EWG to you guesswho
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
pistons.
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_170949.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171021.jpg)
comes with the rings
Ewg
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171204.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171145.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171050.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171056.jpg)
it doesnt leak just doesnt look the best. and no i did not weld this.
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_170949.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171021.jpg)
comes with the rings
Ewg
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171204.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171145.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171050.jpg)
![Image](http://i1224.photobucket.com/albums/ee364/rubasu/IMG_20120402_171056.jpg)
it doesnt leak just doesnt look the best. and no i did not weld this.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
Bump! I'll be leaving soon and won't be able to sell anything till September.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
Bump! I'll be leaving soon and won't be able to sell anything till September.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
I might be interested in a Oil & water pump. Are these used spares or new?
Subaru-less
Re: cleaning out my parts...
used only. no new.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
bump!
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
Do you have the ABS unit from the parts car? If its the Bosch style I am interested (not the Nippon, I already have a spare).
"X2 turbo style water pump $45 each any ej"
There are actually two types of turbo pump. One with two nipples for turbo cars which don't have an oil cooler and one with three nipples for turbo cars with an oil cooler. 91 Legacy turbo has the three nipple one, just like the 02+WRX. 92-94 Legacy turbo have the two nipple one like some models from other countries.
"X2 turbo style water pump $45 each any ej"
There are actually two types of turbo pump. One with two nipples for turbo cars which don't have an oil cooler and one with three nipples for turbo cars with an oil cooler. 91 Legacy turbo has the three nipple one, just like the 02+WRX. 92-94 Legacy turbo have the two nipple one like some models from other countries.
Re: cleaning out my parts...
Ya sorry 1 two nipple and one three nipple water pump
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
Sorry I'm leaving. Ill bump this when I get back.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
Do you have engine mounts for a 1994 EJ22T? I need both....peteRubasu wrote:So I am leaving for four or five months this summer, and decided to sell some of my parts. Most is for my 1st gen leggy but we all know subies are like legos, it all fits.
Ej257 con rods 52mm $75
04 STI springs $80
EJ22t parts.
Factory ej22t head gaskets $100
SOHC heads complete $100
x2 ver1 crank shafts (thrust #3) $75 each
No name up pipe with EWG flange and EWG(not working?) $50 any ej
complete exhaust manifold w/ cat less up pipe $100 any ej
Exhaust collectors w/cross pipe not bolted up $75 any ej
X2 oil pump $45 each any ej 2.2 or smaller
X2 turbo style water pump $45 each any ej
.020 over wiesco pistons 8.5 cr 6000 miles $200
X2 stock rods 52mm $50 each set
X3 intake manifolds bare $50 each
X2 throttle body's $20 each
X2 360cc injectors with rails $75 each set
Remote coolant res. $65
x2 oil pans w/ pick up and windage tray $35 each set any ej
also i have a 93 parts car with no engine but every thing else. i bought it then found out (seen) the fame is bent.
EVERY THING OBO! And willing to ship ant buyers expense only.
fastest way to get a hold of me would be txt. eight 0 one 819 93 95 Andrew
1994 Legacy Sport Wagon (EJ22T)
1977 Leone 4X4 Wagon (EA72)
1977 Leone 4X4 Wagon (EA72)
Re: cleaning out my parts...
Yes I have a few sets but won't have time to ship. I'm driving to indiana.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
Ok no worries dude...travel safe...Rubasu wrote:Yes I have a few sets but won't have time to ship. I'm driving to indiana.
1994 Legacy Sport Wagon (EJ22T)
1977 Leone 4X4 Wagon (EA72)
1977 Leone 4X4 Wagon (EA72)
Re: cleaning out my parts...
bump this stuff is for sell again!
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: cleaning out my parts...
bump!
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
-
- In Neutral
- Posts: 35
- Joined: Tue Jul 26, 2011 7:28 am
Re: cleaning out my parts...
interested in your oil pan. How much with shipping to 94545? Condition?
1993 TW...My new project
1993 L wagon...My new DD
1992 SC400...My old DD
1993 L wagon...My new DD
1992 SC400...My old DD