One thing I noticed is that in Legacy, hot +12v is behind 10A fuse shared with interior lights.
So, modest base actually makes the interior lights flicker

I noticed that ACC +12v is behind 15A RADIO fuse and there are two ACC+12v in factory harness.
The aftermarket uses 18AWG for 12v hot, and 20awg for ACC 12V. The ACC 12v is only used to signal on/off, so the stereo only uses it for signaling purpose.
Was the factory one setup to use hot 12v only for clock keeping and ACC 12v to provide running power?
The ground wire looks wimpy too. It looks like I'll have to pull a a fresh 12v line to stereo.