DP problems....

devilzdriver · Post by **devilzdriver** » Tue Apr 23, 2013 7:23 pm

So i have gone through 2 downpipes, and have had the same problem.... hits the dam trans x member. Who here is running what and had 0 fitment issues?

alexandermf · Post by **alexandermf** » Tue Apr 23, 2013 8:41 pm

Invidia v2 catless dp for a 02-07 wrx.... Perfect fitment

Post by **Legacy777** » Tue Apr 23, 2013 10:55 pm

What engine & trans mounts are you running? When I ran the STi hardeneded trans mount I noticed it raised the trans up slightly and I had to bend the trans mount a little bit to get the fitment I needed.

PhyrraM · Post by **PhyrraM** » Wed Apr 24, 2013 3:39 am

IIRC, factory downpipes are slightly different between 5-speeds and automatics. I don't know how 3rd party downpipes are designed, but I can see the possibility of interference or mismatch.

James614 · Post by **James614** » Wed Apr 24, 2013 4:29 am

HKS catless flat flange DP for the bug eye WRX fits perfectly. Though I'd go with the invidia if I had the chance, which many on here are using.

Rubasu · Post by **Rubasu** » Wed Apr 24, 2013 4:39 am

I was running the turbo xs 4inch donkey d#*% and it never rubbed.

devilzdriver · Post by **devilzdriver** » Fri May 03, 2013 9:23 pm

Legacy777 wrote:What engine & trans mounts are you running? When I ran the STi hardeneded trans mount I noticed it raised the trans up slightly and I had to bend the trans mount a little bit to get the fitment I needed.

I am running the EJ22T w/ 5spd. I do have a group n mount just waiting to get my car back. I have heard that the HKS DP works well but now that i have confirmation i think thats how im going to go.

CFK · Post by **CFK** » Sat May 04, 2013 5:38 am

I have a Megan Bellmouth with a 5MT, it hit. I took a torch to the bend, heated it up and reeved down on it. All good !

devilzdriver · Post by **devilzdriver** » Sun May 12, 2013 6:55 pm

James614 wrote:HKS catless flat flange DP for the bug eye WRX fits perfectly. Though I'd go with the invidia if I had the chance, which many on here are using.

Which invidia DP?

James614 · Post by **James614** » Sun May 12, 2013 7:07 pm

I think its the V2 catless.

cj91legss · Post by **cj91legss** » Sun May 12, 2013 9:08 pm

The title of this thread cracked me up a bit

Post by **Legacy777** » Sun May 12, 2013 10:57 pm

cj91legss wrote:The title of this thread cracked me up a bit

LOL

BoostedSubie · Post by **BoostedSubie** » Mon May 13, 2013 5:21 am

I have a CNT Racing (ebay) meant for a 05 Legacy GT and it fit perfect with no issues. Has been a great downpipe for 3 years now.

robertpaige · Post by **robertpaige** » Mon May 13, 2013 8:31 am

Random no name cheap eBay 02-07 bellmouth worked perfect for me. I have a 4" TurboXS on right now and it's fine as well.

matt00rs25 · Post by **matt00rs25** » Tue May 14, 2013 1:49 am

Running the same no name down pipe and it fit fine.

devilzdriver · Post by **devilzdriver** » Fri May 17, 2013 7:28 am

there is a guy with my local subi club, and hes selling a V3 for 250? seems kinda steep or am i wrong?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

DP problems....

DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....

Re: DP problems....