I swapped out my old wrecked dash for a one I got off a parted out car. Now the following items won't work:
Automatic seat belts
4 way flashers
turn signals
I've checked for loose plugs and fuses, but can't find anything unplugged or blown.
Any ideas? I plan on pulling it apart and checking for hidden plugs tomorrow, along with the 4 way hazard switch.
'lectrical problems after dash swap
Moderators: Helpinators, Moderators
-
- Fourth Gear
- Posts: 1232
- Joined: Tue Jul 31, 2012 10:32 pm
- Location: Portland, Oregon.
Re: 'lectrical problems after dash swap
Sounds like you missed something, look under the dash and make sure everything is plugged in and that no fuses are blown. Always good to double check your work, you might find something you forgot to connect
the guy who had the really low winestone SS on the corvette wheels
Re: 'lectrical problems after dash swap
What year and model is your car and what year and model is the dash you are using? The wiring did change a little bit between years. If it's a compatible year, then yeah I'd suggest checking to make sure all the plugs are connected properly.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: 'lectrical problems after dash swap
I took it back apart and found a plug that got stuck up on the backside of the dash. Plugged 'er in and everything works like a charm now.
Re: 'lectrical problems after dash swap
Glad you figured it out. Thanks for following up.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm